0 items$0.00

No products in the cart.

Free Shipping & No Tax

Category

0 items$0.00

No products in the cart.

Sale!

Oetiker 10100022 Zinc-Plated Steel Hose Clamp, Double Ear, Clamp ID Range 14 mm (Closed) – 17 mm (Open) (Pack of 400)

$94.93

Genuine Oetiker 2-Ear Clamps The ears of these clamps do not have a dimple and nearly double the clamping range, compared to the 1-ear clamp. 2 ears provide a degree of elasticity to accommodate changes in size of the parts being joined, such as that which may be caused by thermal expansion or vibration. Clamp diameterThe following applies as a guideline: To determine the correct clamp diameter, push the hose onto the attaching material, (e.g. the nipple), and then measure the outer diameter of the hose. The value of the outer diameter must be slightly above the average value of the diameter range of the clamp to be selected. The listed size of the clamp denotes the inner diameter (id) of the clamp. How to Install These clamps can be easily installed using Oetiker Hand Installation Pincers (HIP). The HIP tools have been designed especially for pinching ear clamps quickly and easily. Oetiker HIP Compound Action, Standard Jaw Pincer, Item No. 14100386 Oetiker HIP Compound Action Side Jaw Pincer, Item No. 14100387 Oetiker HIP Single Action Standard Jaw Pincer, Item No. 14100396 How to Remove Ear clamps can be easily removed using Oetiker’s hand clamp cutter (HCC). The HCC tool is designed to safely remove ear clamps. Oetiker Hand Clamp Cutter, Item No. 14100407 Please Note: The clamps included in this kit are not designed or intended for use in PEX applications. The sizing references for PEX clamps are not the same as standard Oetiker clamps. Oetiker PEX Clamps should be used for PEX applications. Compact one-piece clamp: for robust, secure connections Clamp ear: fast and simple installation, visible deformation provides evidence of proper closure Deburred edges: reduced risk of damage to parts being clamped Steel, material no. 1.0338/SAE 1008/1010, zinc-plated 2-Ear version: extended clamping range

Add to wishlist
Sale!

About This Item

Genuine Oetiker 2-Ear Clamps

The ears of these clamps do not have a dimple and nearly double the clamping range, compared to the 1-ear clamp. 2 ears provide a degree of elasticity to accommodate changes in size of the parts being joined, such as that which may be caused by thermal expansion or vibration.

Clamp diameter

The following applies as a guideline: To determine the correct clamp diameter, push the hose onto the attaching material, (e.g. the nipple), and then measure the outer diameter of the hose. The value of the outer diameter must be slightly above the average value of the diameter range of the clamp to be selected. The listed size of the clamp denotes the inner diameter (id) of the clamp.

How to Install

These clamps can be easily installed using Oetiker Hand Installation Pincers (HIP). The HIP tools have been designed especially for pinching ear clamps quickly and easily.

Oetiker HIP Compound Action, Standard Jaw Pincer, Item No. 14100386

Oetiker HIP Compound Action Side Jaw Pincer, Item No. 14100387

Oetiker HIP Single Action Standard Jaw Pincer, Item No. 14100396

How to Remove

Ear clamps can be easily removed using Oetiker’s hand clamp cutter (HCC). The HCC tool is designed to safely remove ear clamps.

Oetiker Hand Clamp Cutter, Item No. 14100407

Please Note: The clamps included in this kit are not designed or intended for use in PEX applications. The sizing references for PEX clamps are not the same as standard Oetiker clamps. Oetiker PEX Clamps should be used for PEX applications.

  • Compact one-piece clamp: for robust, secure connections
  • Clamp ear: fast and simple installation, visible deformation provides evidence of proper closure
  • Deburred edges: reduced risk of damage to parts being clamped
  • Steel, material no. 1.0338/SAE 1008/1010, zinc-plated
  • 2-Ear version: extended clamping range

Specifications

Brand
OCSParts
Manufacturer Part Number
10100022
Manufacturer
Oetiker

Reviews

There are no reviews yet.

Be the first to review “Oetiker 10100022 Zinc-Plated Steel Hose Clamp, Double Ear, Clamp ID Range 14 mm (Closed) – 17 mm (Open) (Pack of 400)”

Your email address will not be published.

SKU: RD430JQZ Category:

Related products

  • Sale!
    Quick View

    YELLOW JACKET 49960 Mechanical Manifold Gauge Set,4-Valve

    $174.96

    ” Mechanical Manifold Gauge Set, Number of Valves 4, R-410A, Number of Hoses 4, 60 in, 0 to 800 psig, 30 in Hg to 350 psi, +/-1.00 Percent, 3/8 in, Forged Aluminum Alloy, 1 Percent Accuracy Gauges, UL Recognized Features Promotion Restriction: Not eligible for promotion Features: 1% Accuracy Gauges Standards: UL Recognized Number of Hoses: 4 Gauges Low Side Blue: 30 in Hg to 350 psi Material: Forged Aluminum Alloy Number of Valves: 4 Gauges High Side Red: 0 to 800 psig Refrigerant Compatibility: R-410A Vacuum Port Size: 3/8 in Gauge Accuracy: +/-1.00% Hose Length: 60 in Item: Mechanical Manifold Gauge Set ” Item Type: Mechanical Manifold Gauge Set Brand: YELLOW JACKET Manufacturer Part Number: 49960

    Read more
    wishlist
  • Sale!
    Quick View

    5-position hydraulic pinch gauge, feedback model

    $167.66

    Hydraulic 5-level pinch gauge is available in clinic mode (gauge facing clinician) and feedback mode (gauge facing patient). Adjustable handle fits all size hands for accurate and repeatable pinch measurements. 5-position strength test protocols (MVE and MMVE) now can be used for pinch measurements. Easy to adjust paddle accommodates to any size hand (other pinch gauges only have one pinch width). Pinch width without paddle is the same width as standard pinch gauges, both mechanical and hydraulic. 5 pinch positions permits MVE and MMVE protocols to be used with tip, palmar and key tests. 5-level Pinch Feedback Mode – 50 lb Capacity5-position hydraulic pinch gauge, feedback model

    Add to cart
    wishlist
  • Sale!
    Quick View

    Mitutoyo Digimatic Micrometer, 293-832-30

    $138.70

    Digimatic Micrometer, Resolution 0.00005 In./0.001mm, Range 0-1 In./0-25mm, Friction Thimble, SPC Output No, Long Form Calibration Certificate No, Flat Carbide Tipped Anvil, Flat Spindle, Lock Nut Type -, Features Provided with a zero set and in/mm keys., Includes Fitted Plastic Case Features Features: Provided with a zero set and in/mm keys. Includes: Fitted Plastic Case Item: Digimatic Micrometer Range: 0-1″/0-25mm Resolution: 0.00005″/0.001mm SPC Output: NO Spindle: Flat Anvil: Flat Carbide Tipped Thimble: Friction Long Form Calibration Certificate: No Item Type: Electronic Micrometer Brand: MITUTOYO Manufacturer Part Number: 293-832-30 Includes: Fitted Plastic Case Features: Provided with a zero set and in/mm keys.

    Add to cart
    wishlist
  • Sale!
    Quick View

    Wilton ATV All-Terrain Vise, 6 in Jaw, 5 in Throat, Stationary Base

    $154.91

    ATV ALL TERRAIN VISEFits a standard 2″ hitch and includes a hitch pin for security; Can be mounted on a bench or trailer for even greater versatility.; Lightweight and with an integrated carrying handle, the ATV is designed for easy transport; Patented 360° locking handle secures the handle while driving or repositions it while working; The included set screws are designed to provide a tight fit in the hitch and reduce vibration while driving; Ideal working height doesn’t interfere with truck bed or tailgate; Jaws are replaceable and include a v-groove for vertical clamping of round objects; 60,000 PSI ductile iron body; Model Number: 10010

    Read more
    wishlist