1 item$98.01

Free Shipping & No Tax

Category

1 item$98.01
Sale!

Milwaukee 2131-20 M18 18-volt Lithium-ion Cordless Rocket Dual Power Tower

$128.17

The M18 ROCKET Dual Power Tower Light can run on an M18 power source or off an extension cord. The pivoting head can extend from 4-7′ to minimize shadows in work areas. The three modes: high, medium and low offer up to 2,500 lumens, 1,100 lumens and 700 lumens, respectively. High, medium and low modes also offer up to 4, 8 or 12 hours of runtime, respectively.

Out of stock

Add to wishlist
Sale!
The M18 ROCKET Dual Power Tower Light can run on an M18 power source or off an extension cord. The pivoting head can extend from 4-7' to minimize shadows in work areas. The three modes: high, medium and low offer up to 2,500 lumens, 1,100 lumens and 700 lumens, respectively. High, medium and low modes also offer up to 4, 8 or 12 hours of runtime, respectively.2,500 lm of TRUEVIEW high definition output5 Second setup, 7 ft extensionDual power: powered by M18 or extension cordLow battery indicatorImpact Resistant reinforced legsImpact resistant, adjustable light headProtective light head guard when stored or in transportation

 

 

Specifications

Volts
18 V
Brand
Milwaukee

Reviews

There are no reviews yet.

Be the first to review “Milwaukee 2131-20 M18 18-volt Lithium-ion Cordless Rocket Dual Power Tower”

Your email address will not be published.

SKU: AJHYWXLU Category:

Related products

  • Sale!
    Quick View

    Kreg K4MS Jig K4 Master System

    $169.23

    The Do-It-Yourself Kreg Jig® with Bonus Accessories: The Kreg Jig® K4 Master System is a great choice for any woodworking enthusiast looking for a complete set to get started building with Kreg Joinery. With its solid clamp, large clamping recess, dust collection attachment, material support stop, and removable 3-hole drill guide, this jig truly has it all. The Master System includes a Kreg Jig® K4, Bonus Kreg Accessories: the Kreg Face Clamp, Portable Base, and more. Large Clamping Recess: The Large Clamping Recess makes it easy to secure your jig to your workbench using Kreg multi-purpose Face Clamps or any common bar clamp or C-clamp. Sturdy Toggle-Clamp: The Kreg Jig® K4’s rear-mounted clamp design has been around since the first Kreg Jig®. It’s a proven design, offering incredible rigidity and uncompromising workpiece hold-strength. Adjustments are as easy as releasing the locknut and rotating to the correct setting. 3 Tools in 1: Thanks to its removable Drill Guide, the Kreg Jig® K4 Master System can serve as many different tools: a sturdy benchtop jig that utilizes the benchtop base for high speed pocket holes, a contractor-grade jig for work on the road through the use of the portable base, and a high-quality repair jig when you add spacer blocks to the bottom of the drill guide. 3-Hole Drill Guide: The 3-hole Drill Guide lets you drill pocket holes in a wide variety of material widths and thicknesses from 1/2″ to 1 1/2″ in 1/8″ increments. Every Kreg Drill Guide features a hardened-steel core, which carries a lifetime guarantee. The core shrouds the bit and supports the workpiece through 100% of the drill-stroke, resulting in minimal bit deflection, reduced tear-out, and a clean, pluggable pocket hole. Material Support Stop: The Material Support Stop can be set at any distance from the jig to help you repeat the same pocket holes over and over again. The stop can also be swung out of the way to serve as a height support for larger panels. Glass-Reinforced Nylon Body: The blue body of every Kreg Jig® K4 is made from a heavy-duty, glass-reinforced nylon. This composite material offers the resiliency and flexibility you need without sacrificing the strength and durability Kreg customers have come to expect. Superior Angle: Unlike competing jigs with a shallower angle of approach, the Kreg Jig® K4 Master System features an optimized drilling angle, specifically designed to increase driving efficiency and minimize the overall size of the pocket hole. The result is a compact pocket hole, less than 1 1/2″ in size. Wood-Chip Relief: The Kreg Jig® K4 Master System includes one wood-chip relief hole for every Drill Guide hole, designed to keep the drill bit clear of excess wood chips, minimize drill torque, increase the longevity of your drill bits, and allow you to complete a perfect pocket hole in just one plunge. The Kreg Jig® K4 is the perfect choice for do-it-yourselfers and anyone new to pocket-hole joinery.  Build projects from wood the fast, strong, easy way using pocket-hole joinery and the Kreg Jig® K4. With the Kreg Jig, all you have to do is drill a hole in one of the pieces you want to join. Then drive in a Kreg Screw. The self-tapping tip draws the joint together and holds it tight, so you can create beautiful, durable projects quickly. Its simple design gives you the confidence you need to get started, and you’ll have your project finished in no time with joints as easy as “Drill. Drive. Done!”   The Master System includes a Kreg Jig® K4 and Bonus Kreg Accessories: the Kreg Face Clamp, Portable Base,  Dust Collection Attachment, and Material Support Stop.Kreg K4Ms Jig K4 Master System For use with materials 1/2″ to 1 1/2″ (12-38mm) thick in 1/8″ (3mm) incremental settings Works with solid wood and plywood Removable Drill Guide for benchtop and portable use Drill Guide includes 3-hole fixed spacing Dust-Collection Shroud collects wood chips as you work Material Support Stop for consistently repeating hole spacings Hardened-steel Kreg Drill Guides feature a lifetime warranty

    Add to cart
    wishlist
  • Sale!
    Quick View

    BOSCH GSR18V-190B22 Cordless Drill/Driver Kit,18V,1/2",Battery Included

    $95.40

    Higher-voltage cordless drills have an easier time spinning fast and drilling through tougher materials. Here is some additional information about this nan : VOLTAGE: 18, CORDLESS TOOL BATTERY TYPE: Li-IonFeaturesCordless Tool Battery Type: Li-IonBattery Included / Bare Tool: Battery IncludedVoltage: 18

    Read more
    wishlist
  • Sale!
    Quick View

    WEN 15-Amp 10-Inch Single Bevel Compact Sliding Compound Miter Saw with Laser, MM1011

    $175.58

    Remember when your miter saw could do it all? Create cuts at any angle with the WEN 10-Inch Single Bevel Sliding Compound Miter Saw. Our powerful 15-amp motor slices through even the hardest of woods, rotating the blade up to 4500 times per minute. This versatile saw miters up to 45 degrees in either direction and bevels up to 45 degrees to the left. Cut boards up to 12 inches wide and 3-1/2 inches thick or make compound cuts (45 degree bevel and 45 degree miter) in boards 8-1/4 inches wide and 2-1/5 inches thick. The saw features 9 positive miter stops: two at 15 degrees, two at 22.5 degrees, two at 30 degrees, two at 45 degrees and one at 0. However, if a more unique angle is preferred, the miter lock still allows the saw to lock at any angle between those stops. This spacious saw also features a 7-1/2-inch crown molding nested capacity and a 6-3/4-inch base board vertical capacity. The compact design makes for great portability and storage between uses. Measuring in at 17.5 by 28 by 16.5 inches, you?ll never have to worry about your rail system interfering with your wall again. This package also includes a 10-inch 40-tooth carbide-tipped blade (w/ 5/8-inch arbor), two table extensions, one clamp assembly, a class II laser guide, a dust port adapter, and a dust bag. The onboard laser illuminates the line of cut for maximum accuracy while the dust collection port allows for connection to either the included dust bag or your dust collection device of choice. And, because it?s a WEN product, your miter saw comes backed by a two-year warranty, a stocked inventory of replacement parts, and a friendly customer help line, all to make sure you remember WEN.

    Read more
    wishlist
  • Sale!
    Quick View

    Kreg K5MS Jig K5 Master System

    $123.93

    Make your Kreg Jig K5 even better by upgrading to a Master System. The Kreg Jig K5 Master System combines the Kreg Jig K5 with premium accessories to make it even easier to get started building with Kreg Joinery. Accessories include a 3″ Wood Project Clamp with Automaxx auto-adjust technology, a Portable Base for building on the go, and downloadable plans for six great projects. The new 3″ Wood Project Clamp features auto-adjust technology that simplifies project construction by allowing you to clamp workpieces of varying thicknesses without ever having to adjust the clamp. That makes it the perfect companion to the ratcheting, tool-free workpiece clamp on the Kreg Jig K5. Adding the Portable Base gives you yet another use for your Kreg Jige K5 simplified setup for portable building and making repairs. See the Portable Base in action in this Quick Tip video. Plus, the Kreg Jig K5 Master System includes step-by-step downloadable plans for six great home projects so that you can get started building right away. Advanced Features for Building with Wood: The Kreg Jig K5 incorporates the best features of every Kreg Jig that came before, with innovative upgrades you’ve never seen. That starts with a clamping mechanism that you can quickly adjust, without tools or adjusting nuts, to match your workpiece thickness. Just slide the clamp into place, the large front-mounted clamp handle, and your jig is set to hold your workpiece tight every time. You’ll find large support wings to hold your workpiece steady plus, they open up to provide handy storage for bits and accessories. Add in a batch of other great features, like a swiveling dust collection port, spring-loaded stop for the drill guide block, and, of course, the ability to remove the guide block for portable use, and you have quite simply the most advanced Kreg Jig yet. Build projects from wood the fast, strong, easy way using pocket-hole joinery and the Kreg Jig® K5. With the Kreg Jig, all you have to do is drill a hole in one of the pieces you want to join. Then drive in a Kreg Screw. The self-tapping tip draws the joint together and holds it tight, so you can create beautiful, durable projects quickly. Its simple design gives you the confidence you need to get started, and you’ll have your project finished in no time with joints as easy as “Drill. Drive. Done!”   The Master System adds a 3″ clamp with Automaxx® adjustment that helps achieve perfect joints, plus a versatile portable base.Kreg K5Ms Jig K5 Master System Front-mounted handle makes clamping easy Ratcheting clamp mechanism adjusts without tools Storage wings provide built-in storage for bits and accessories Swiveling dust collection port accepts any standard vacuum hose Adjustable workpiece stop mounts on either side for easy repeat drilling Stop-collar setting block makes drill bit setup easy Quick-release pin holds drill block securely in place Hardened-steel Kreg drill guides feature a lifetime warranty Comes with Kreg Jig® K5, 3″ Wood Project Clamp, Portable Base for building on the go, and 6 downloadable plans

    Add to cart
    wishlist