Category: Hand Tools
Hand Tools
Showing 161–176 of 278 results
-
Mitutoyo Digimatic Micrometer, 293-832-30
$119.02Add to cartDigimatic Micrometer, Resolution 0.00005 In./0.001mm, Range 0-1 In./0-25mm, Friction Thimble, SPC Output No, Long Form Calibration Certificate No, Flat Carbide Tipped Anvil, Flat Spindle, Lock Nut Type -, Features Provided with a zero set and in/mm keys., Includes Fitted Plastic Case Features Features: Provided with a zero set and in/mm keys. Includes: Fitted Plastic Case Item: Digimatic Micrometer Range: 0-1″/0-25mm Resolution: 0.00005″/0.001mm SPC Output: NO Spindle: Flat Anvil: Flat Carbide Tipped Thimble: Friction Long Form Calibration Certificate: No Item Type: Electronic Micrometer Brand: MITUTOYO Manufacturer Part Number: 293-832-30 Includes: Fitted Plastic Case Features: Provided with a zero set and in/mm keys.
-
MTC Air Mass Meter Boot, w/Clamp
$114.57Read moreMTC Air Mass Meter Boot The MTC Air Mass Meter Intake boots meets or exceed the quality, fit and performance of the original equipment it replaces. Features and Benefits: Flexibility and vacuum stability thanks to folds and ribs Noise-dampened with specific stiffening Integration of pressure and/or temperature sensors Will not lose structural durability at high temperatures
-
Oetiker 10100022 Zinc-Plated Steel Hose Clamp, Double Ear, Clamp ID Range 14 mm (Closed) – 17 mm (Open) (Pack of 400)
$94.93Add to cartGenuine Oetiker 2-Ear Clamps The ears of these clamps do not have a dimple and nearly double the clamping range, compared to the 1-ear clamp. 2 ears provide a degree of elasticity to accommodate changes in size of the parts being joined, such as that which may be caused by thermal expansion or vibration. Clamp diameterThe following applies as a guideline: To determine the correct clamp diameter, push the hose onto the attaching material, (e.g. the nipple), and then measure the outer diameter of the hose. The value of the outer diameter must be slightly above the average value of the diameter range of the clamp to be selected. The listed size of the clamp denotes the inner diameter (id) of the clamp. How to Install These clamps can be easily installed using Oetiker Hand Installation Pincers (HIP). The HIP tools have been designed especially for pinching ear clamps quickly and easily. Oetiker HIP Compound Action, Standard Jaw Pincer, Item No. 14100386 Oetiker HIP Compound Action Side Jaw Pincer, Item No. 14100387 Oetiker HIP Single Action Standard Jaw Pincer, Item No. 14100396 How to Remove Ear clamps can be easily removed using Oetiker’s hand clamp cutter (HCC). The HCC tool is designed to safely remove ear clamps. Oetiker Hand Clamp Cutter, Item No. 14100407 Please Note: The clamps included in this kit are not designed or intended for use in PEX applications. The sizing references for PEX clamps are not the same as standard Oetiker clamps. Oetiker PEX Clamps should be used for PEX applications. Compact one-piece clamp: for robust, secure connections Clamp ear: fast and simple installation, visible deformation provides evidence of proper closure Deburred edges: reduced risk of damage to parts being clamped Steel, material no. 1.0338/SAE 1008/1010, zinc-plated 2-Ear version: extended clamping range
-
Olympia Tools 48″ Aluminum Pipe Wrench, 01-648
$161.11Read moreOlympia Tools is a widely recognized brand of hardware products designed for true professionals who takes their tools seriously. Each piece is made to exacting tolerances and tested to ensure that it meets and exceeds industry standards so that it meet your needs on the jobsite, shop or on home projects. Olympia goes all out to bring award winning innovation and quality to each product: the appearance, fit and finish of every Olympia product will make you proud you own the very best. Only the finest tools will suit your needs. Use the high quality Olympia Tools 48″ Aluminum Pipe Wrench to tackle your next job around the home.
-
Olympia Tools 5" Open End Multi-Purpose Vise, 38-644
$66.55Add to cartOlympia Tools is a widely recognized brand of hardware products designed for true professionals who takes their tools seriously. Each piece is made to exacting tolerances and tested to ensure that it meets and exceeds industry standards so that it meet your needs on the jobsite, shop or on home projects. Olympia goes all out to bring award winning innovation and quality to each product: the appearance, fit and finish of every Olympia product will make you proud you own the very best. Only the finest tools will suit your needs. Keep your latest project in place with the strong 38-644 Olympia Tools Open End Multi-Purpose Vise. Weighing a sturdy 62 pounds, this tool features a 5″ jaw width and 4-3/4″ jaw opening to provide a fixed grip on thick working materials. The base swivel rotates a full 360 degrees. The device can be attached to your work table with screws through holes along the circular base. With a working pressure of 30,000 PSI, the swivel vise provides high-quality performance to each do-it-yourself adventure.Olympia Tools 5″ Open End Vise, 38-644: 5″ open end multi-purpose vise Jaw width: 5″ Jaw pad size: 5″ x 3/4″ x 7/8″ Jaw opening: 4-3/4″ Throat depth: 2-3/4″ Anvil size: 3″ x 3″ Forming horn: yes Base swivel degree: 360 Overall size: 18″L x 7″W x 11″H 5″ vise weight: 62 pounds PSI: 30,000
-
OTC Tools & Equipment 7211 Gauge and Hose Assembly
$81.32Read moreFeatures a sturdy 3-1/2 in. dial that reads up to 100 PSI Has a built-in 100 – 150 PSI retard to prevent excess pressure damage Assembly’s disconnect fitting has a check valve to lessen chance of fuel spray Bleed valve eliminates air from injection system and can be used to reduce pressure when disconnecting hoses Bleed valve also allows gauge assembly to be used to check fuel pump volume Value is at the core of OTC Tools, whether it’s a simple repair, or the most complex drivability concern, these award-winning tools universally solve problems faster, and at a better value, than any other product on the market. OTC provides top solutions to modern automotive service challenges while at the same time increasing technician’s productivity and shop profits. Features a sturdy 3-1/2 in. dial that reads up to 100 PSI. Has a built-in 100 – 150 PSI retard to prevent excess pressure damage. Assembly’s disconnect fitting has a check valve to lessen chance of fuel spray. Bleed valve eliminates air from injection system and can be used to reduce pressure when disconnecting hoses. Bleed valve also allows gauge assembly to be used to check fuel pump volume. Includes 6 ft. Bleed Hose 30 in. Pressure Hose Gauge Specifications Bleed Hose Length: 6 ft. Pressure Hose Length: 30 in.
-
Palmgren 9630601 6 in Jaw Width Cross Slide Vise
$151.47Read more” Machine Vise, Cross Slide Vise, Stationary Base, Jaw Width (In.) 6 in, Jaw Opening (In.) 6 in, Throat Depth (In.) 2 in, Overall Length (In.) 14-5/8, Overall Height (In.) 7-3/8, Max. Travel 3-1/2 in x 4 in, Clamping Force (Lb.) 30,000, Jaw Deflection 0.002 in @ 2000 lbs, Jaw Plate Smooth, Bed/Base Center Rod Features Overall Length (In.): 14-5/8 Clamping Force (Lb.): 30,000 Jaw Width (In.): 6 in Base: Stationary Max. Travel: 3-1/2 in x 4 in Jaw Plate: Smooth Jaw Deflection: 0.002 in @ 2000 lbs Overall Height (In.): 7-3/8 Item: Machine Vise Throat Depth (In.): 2 in Jaw Opening (In.): 6 in Bed/Base: Center Rod Type: Cross Slide Vise Features: This Cross Slide Tableand Vise Built into One Accurately Move Work in 2 Directions, This Makes Work Piece Positing Fast, Easy, and Accurate, This Vise is Able to Move Along Both the X and Y Axis ” Item Type: Machine Vise Brand: PALMGREN Manufacturer Part Number: 9630601
-
PanaVise 314 Heavy-Duty Clamping Multipurpose Vise Combo
$94.64Read moreThe PanaVise Heavy-Duty Clamping Multipurpose Vise Combo is the self-centering, extra-wide opening mobile work vise. This combo contains a self-centering, extra-wide-opening head, original PanaVise base, and the bench clamp base mount. By centering the weight, this vise head allows you to hold larger, heavier objects with ease and opens up to 9 in. The double action jaws open/close quickly and can be reversed to provide 0 in. closure. The heavy-duty clamping base includes 4 nonmarring, antiskid neoprene pads for additional antislip characteristics without excessive tightening of the clamping screw. The base can clamp to anything up to 3-7/16 in. thick.
-
Pentagon Tool Professional 24″-40″ Drywall Stilts For Sheetrock Painting or Cleaning – Silver
$91.43Add to cartIf you are in the market for a set of drywall stilts, stop looking! Pentagon Tool is an industry leader in drywall supplies and accessories. They sell more lifts, stilts, and accessories than most other sellers combined. You are bidding on a set of NEW premium grade Drywall Stilts. They are perfect for drywall painting, electrical, drop ceilings, and many other applications. These are made of premium grade aluminum alloy. The exclusive wing bolt design offers flexibility and versatility–now you can adjust the height withouttools.
-
Power Stop Front Pair of Red Powder Coated Calipers S4890
$162.81Add to cartCheck compatibility with your vehicle at http://www.powerstop.com/walmart/ Power Stop Performance Brake Calipers are made specifically with the enthusiast in mind. These calipers bolt directly in place of the stock calipers, and they look and perform great behind stock or custom wheels. The Caliper and the Bracket are remanufactured in our Chicago, IL facility and treated to a high-temperature red powder-coating. All new premium boots and seals are used, along with high-temperature silicone lubricant on the caliper pins for long life. Every caliper is expertly remanufactured, and lubricated with premium silicone lubrication providing smoother operation. All calipers are thoroughly inspected for quality and safety. Pressure tested to prevent leaks, and high temperature EPDM rubber for extended life. The easy to clean powder coating helps to resist rust and corrosion and extends the life of calipers. The performance red is a nice touch and really stands out behind your wheels!
Products
-
60" Mantel Shelf with Optional Corbels
$135.83
-
HART 20-Volt Brushless Orbital Jig Saw (Battery Not Included)
$98.54
-
KRAUS Natura Square Semi-Recessed Composite Bathroom Sink with Matte Finish and Nano Coating in White
$75.11
-
KRAUS Ansel Dual Function Pull-Down Kitchen Faucet, Chrome Finish
$117.12
-
Kraus Spot Free Bolden™ 18-Inch Commercial Kitchen Faucet with Soap Dispenser in all-Brite™ Stainless Steel Finish
$177.07
Top rated products
-
Glidden One Coat Exterior Paint and Primer, Tundra Frost / White, 5 Gallon, Semi-Gloss
$132.84
-
Ninja Professional Blender with Single Serve Cups BL660WM
$77.42
-
Dyson V8 Animal Cordless Vacuum | Titanium | Refurbished
$269.10
-
AdirOffice 0.5 Cubic Feet Wall Safe with Electronic Lock
$103.68
-
Excellante 25 quart 18/8 stainless steel brazier, comes in each
$100.20