Category: Tools
Tools
Showing 721–736 of 767 results
-
WEN 2500 PSI Tie Rod Hydraulic Cylinder with 2.5 in. Bore and 30 in. Stroke
$93.75Add to cartRemember when you had a cylinder that lasted? Maximize reliability in agriculture, construction, manufacturing, machinery, and more with a WEN Tie-Rod Hydraulic Cylinder. This double-acting steel-welded tie-rod hydraulic cylinder creates operating pressures of 2500 PSI. The 3/8-inch NPT port size attaches easily to any standard hydraulic hose. With a 2.5-inch bore and a 30-inch stroke, this durable cylinder goes from a retracted length of 40.25 inches all the way out to an extended length of 70.25 inches. This cylinder also includes a reinforced O-ring tube seal, a cold-drawn tube to maximize seal life, a 1-inch diameter zinc-plated steel pin, a high-tensile ground and polished chrome-plated rod, an ASTM A536 65-45-12 ductile iron piston, and ductile iron female clevises with grade 8 clamp nuts. And because it’s a WEN product, your tie rod cylinder comes backed by a two-year warranty, a stocked inventory of replacement parts and a two-year warranty, all to make sure you remember WEN.
-
WEN 2500 PSI Tie Rod Hydraulic Cylinder with 2.5 in. Bore and 36 in. Stroke
$101.57Add to cartRemember when you had a cylinder that lasted? Maximize reliability in agriculture, construction, manufacturing, machinery, and more with a WEN Tie-Rod Hydraulic Cylinder. This double-acting steel-welded tie-rod hydraulic cylinder creates operating pressures of 2500 PSI. The 3/8-inch NPT port size attaches easily to any standard hydraulic hose. With a 2.5-inch bore and a 36-inch stroke, this durable cylinder goes from a retracted length of 46.25 inches all the way out to an extended length of 82.25 inches. This cylinder also includes a reinforced O-ring tube seal, a cold-drawn tube to maximize seal life, a 1-inch diameter zinc-plated steel pin, a high-tensile ground and polished chrome-plated rod, an ASTM A536 65-45-12 ductile iron piston, and ductile iron female clevises with grade 8 clamp nuts. And because it’s a WEN product, your tie rod cylinder comes backed by a two-year warranty, a stocked inventory of replacement parts and a two-year warranty, all to make sure you remember WEN.
-
WEN 2500 PSI Tie Rod Hydraulic Cylinder with 3.5 in. Bore and 30 in. Stroke
$122.51Add to cartRemember when you had a cylinder that lasted? Maximize reliability in agriculture, construction, manufacturing, machinery, and more with a WEN Tie-Rod Hydraulic Cylinder. This double-acting steel-welded tie-rod hydraulic cylinder creates operating pressures of 2500 PSI. The 1/2-inch NPT port size attaches easily to any standard hydraulic hose. With a 3.5-inch bore and a 30-inch stroke, this durable cylinder goes from a retracted length of 40.25 inches all the way out to an extended length of 70.25 inches. This cylinder also includes a reinforced O-ring tube seal, a cold-drawn tube to maximize seal life, a 1-inch diameter zinc-plated steel pin, a high-tensile ground and polished chrome-plated rod, an ASTM A536 65-45-12 ductile iron piston, and ductile iron female clevises with grade 8 clamp nuts. And because it’s a WEN product, your tie rod cylinder comes backed by a two-year warranty, a stocked inventory of replacement parts and a two-year warranty, all to make sure you remember WEN.
-
WEN 3-in-1 Pneumatic 21-Degree, 28-Degree and 34-Degree Framing Nailer with Carrying Case
$97.81Read moreRemember when you had three nailers in one? Find the perfect angle with the WEN 3-in-1 Framing Nailer. Our unique design allows users to switch from 21 degrees to 28 degrees to 34 degrees depending on the needs of the task at hand. Fire 2 to 3-1/2 inch plastic-collated round-head framing nails at 21 degrees, or 2-3/16 to 3-1/2-inch wire- or paper-collated clipped-head framing nails at 28 or 34 degrees. Connect the air compressor of your choice to the 1/4-inch NPT air inlet, the nailer requiring 5.8 CFM of air at 90 PSI. The spacious magazine holds up to sixty 21-degree nails at a time, or up to ninety 28 or 34-degree nails. The removable non-marring tip prevents damage to your workpiece, while the firing selector lets you go from single to sequential firing modes with the simple flip of a switch. The hard-bodied carrying case provides an easy storage and transport solution between uses. The 9.4-pound body combines with the ergonomic rubber-backed handle to limit fatigue during long days on the job site. Onboard depth adjustment lets users select the exact depth they want their nail to fire. This nailer accepts smooth, ring, or screw shank nails ranging from .113 to .131 inches in diameter. And because it’s a WEN product, your 3-in-1 framing nailer comes backed by a two-year warranty, a stocked inventory of replacement parts, and a friendly technical support team, all to make sure you remember WEN.
-
WEN 3.2-Amp 8-Inch by 12-Inch Variable Speed Mini Benchtop Wood Lathe
$187.59Read moreRemember when you could turn your own pens? Fill your house with as many pens as you can with the WEN 8-Inch by 12-Inch Variable Speed Mini Wood Lathe. Adjust the variable speed anywhere from 750 to 3200 rotations per minute. The WEN 8-Inch by 12-Inch Variable Speed Benchtop Wood Lathe features an MT1 spindle and tailstock taper to tightly grip workpieces, two tool rests (4-1/2 inch and 7 inch) to provide needed support for chisels and tools during operation, and a 3.2-amp motor to keep things turning. The easy-to-use lever clamping system makes adjustments to both the tool rest and the tailstock simple and precise. The WEN Wood Lathe also includes a flat wrench, a headstock spur center, a tailstock cup center, a knockout rod and a 2.3-inch faceplate for non-spindle workpieces. And, because its a WEN product, your lathe comes backed by a two-year warranty, a nationwide network of skilled service technicians and a friendly customer help line. Remember when you could turn pens, chess pieces and more? Remember WEN.
-
WEN 3.5-Amp Oscillating Belt and Spindle Sander, 6524
$162.45Add to cartRemember when you were the king of the twist? Now you can make your belt oscillate without ever setting foot on a dance floor with the WEN Oscillating Belt and Spindle Sander. Sand arcs, curves, contours, faces and more of even the most strangely shaped workpieces. This versatile machine acts as both a spindle sander and a belt sander, oscillating up to 58 times per minute with a 5/8-inch stroke. This package includes five different spindle sanding sizes (1/2 inch, 3/4 inch, 1 inch, 1-1/2 inch and 2 inch) and one 4 x 24 inch belt. The powerful 3.5 amp motor rotates the various spindles up to 2000 times per minute and the belt up to 1575 feet per minute. Onboard storage helps to organize all of the throat plates, rubber sanding drums and table inserts included with this sander while the 1-1/2 inch dust port allows woodworkers to connect a dust collection system to minimize clean up. Adjust the table anywhere from 0 to 45 degrees to help take on angled edges and surfaces. This sander also comes with six pieces of 80 grit sandpaper: one for the belt and five for each respective size spindle diameter. And because its a WEN Product, your purchase comes backed by a two year warranty, a nationwide network of skilled service technicians and a friendly customer help line. It?s time to shake things up with the WEN Oscillating Belt and Spindle Sander. Remember when you could easily sand any curve or edge your heart desired? Remember WEN.
-
WEN 3.5-Amp Oscillating Spindle Sander, 6510T
$93.96Add to cartRemember when you used to have to sand those rounded edges by hand. With the WEN Oscillating Spindle Sander you’ll never have to face that problem again. This is the ultimate sanding tool for quickly and easily smoothing out arcs, curves, contours and odd shapes. The plates and drums are easy to swap in and out and the lightweight design allows for easy mobility if need be. However, just because the compact design weighs in at a mere 30 pounds does not mean that we’ve sacrificed power. The WEN Oscillating Spindle Sander features a smooth and quiet 1/2HP 3.5 Amp motor while the sanding spindle moves up to 58 oscillations and 2000 rotations per minute with a 5/8 inch stroke. Our package includes six sanding sleeve attachment sizes (1/2, 3/4, 1, 1-1/2, 2 and 3 inches) and five rubber drums to allow for a full range of curves to match whatever the situation calls for. Meanwhile, the onboard storage keeps the spindles, sleeves, table inserts and spindle washers organized and accessible for quick changes. The dust port provides the option to attach dust extractor to collect the airborne dust particles, ensuring a cleaner working surface and shop so you can keep building. And because it’s a WEN Product, our Oscillating Spindle Sander is also backed by a two-year warranty, a friendly and knowledgeable customer service hotline and a national network of experienced service technicians. It’s time to make any difficult sanding task a breeze, allowing for maximum creativity with any woodworking project. Remember when you could easily sand any curve or edge your heart desired.
-
WEN 4.3-Amp 4 x 36-Inch Belt and 6-Inch Disc Sander with Cast Iron Base, 6502T
$97.20Add to cartRemember when you needed a versatile and reliable sander? The WEN Belt Disc Sander easily sands, smooths and removes all of the jagged edges and splinters on your wood and lumber. With a 4.3 amp 1/2 HP motor, users should anticipate enough power to prevent this machine from bogging down under a large load. Changing the spacious 4-inch-by-36-inch belt is a breeze, so you?ll have the power to switch and replace sand paper grits as needed without wasting any time. The belt also tilts anywhere from 0 to 90 degrees to accommodate the needs of your particular workpiece while the heavy cast-iron base prevents vibrations. With all of this in addition to the 6-inch side disc, you?ll have the capacity to sand whatever your heart desires. The sanding disc is accompanied by a sturdy cast-aluminum work table. Included with the belt disc sander is a miter gauge for steady sanding on angled edges, a stop bar for safety and control, and a 2.25 inch dust port to connect a dust extractor. And because this is a WEN Product, your purchase comes backed by a two-year warranty, a nationwide network of skilled experienced technicians, and a helpful customer service line all to make sure that you remember WEN.
-
WEN 5-Amp Cast Iron Bench Mortiser with Chisel Bit Set, 43012
$178.20Read moreRemember when your holes were square? Strengthen your workpieces with the WEN Benchtop Mortising Machine. Our powerful 5-amp motor provides you up to 1725 rotations per minute, making easy work out of even the toughest of woods. The spacious chuck accepts bits anywhere from 1/32 of an inch to 1/2 of an inch (1/4 to 1/2 inch for chisel bits), giving you the versatility needed to take on any project. With spindle travel of 4-1/4 inches and a max stock thickness of 4 inches, you’ll be able to create sturdy and reliable mortises up to 3 inches in depth. The pneumatic spring head returns easily and smoothly while the spring-loaded fence allows for both fine-tune and large scale adjustments. The spacious table measures in at 13-1/2 by 6 inches with a work-piece hold down that accepts boards up to 3-1/2 inches thick. The adjustable feed handle rotates freely to prevent collision with your workpiece, springing back into place once you select your optimal start and stop points. The onboard depth stop prevents you from drilling past your intended distance. The spring-loaded protective chip guard easily flips up and down depending on your current needs. This package also includes three chisel bits, measuring in at 1/4, 3/8 and 1/2 inch in size, along with an extra chuck extension adapter, a 3/4-inch chisel bushing, and a 10 by 8-inch cast iron base. And because its a WEN mortiser, your bench top mortising machine comes backed by a two-year warranty, a nationwide network of skilled service technicians, and a friendly customer help line, all to make sure you remember WEN.
-
WEN 5-in-1 Pneumatic Multi-Function Tool with Scraper, Shovel, and Chisel Attachments
$150.69Read moreRemember when you could dig holes and demolish walls? Power through dirt, rock, brick, linoleum and more with the WEN 5-in-1 Pneumatic Multi-Tool. This versatile air-powered shovel and chisel attaches to your favorite air compressor via the onboard 1/4-inch 18 NPT coupling, providing you an arsenal of bits at your disposal. Pop on one of the four included chisels and scrapers for easy remodeling and demolition, or install the shovel blade to make quick work of any garden job. And, because its a WEN Product, your Pneumatic Multi-Tool comes backed by a two-year warranty, a nationwide network of skilled service technicians, and a friendly technical support line, all to make sure you remember WEN.
-
WEN 600-Pound Capacity Portable Clamping Saw Horse Work Bench with Non-Marring Jaws
$139.85Read moreRemember when you had the ultimate portable work station? It’s time to add some support to your workshop with the WEN Clamping Saw Horse. Our robust non-marring 8-by-3-inch jaws open up to 40 inches while the sturdy steel-frame construction supports up to 600 pounds, accommodating even the largest workpieces. The easy-to-use foot pedal provides hands-free operation, clamping down on workpieces with up to 2200 pounds of force. Our conveniently collapsible design folds down to 31 by 14.5 by 12.75 inches. Combine that with the onboard carrying handle for easy transportation and storage between uses. Easily transform this saw horse into a portable work station or miter saw stand by clamping in a piece of plywood. And because it’s a WEN product, your clamping saw horse comes backed by a two-year warranty, a stocked inventory of replacement parts and a friendly customer help line. Remember when you had support wherever you needed it? Remember WEN.
-
WEN Clevis Hydraulic Cylinder with 2-inch Bore and 30-inch Stroke
$103.58Read moreRemember when you had a cylinder that lasted? Maximize reliability in agriculture, construction, manufacturing, machinery, and more with a WEN Hydraulic Cylinder. This double-acting clevis hydraulic cylinder wtihstands operating pressures of up to 3000 PSI. The SAE-6 port (9/16 inch-18UNF) attaches easily to the hydraulic hose of your choice. With a 2-inch bore and a 30-inch stroke, this durable cylinder goes from a retracted length of 40.25 inches all the way out to an extended length of 70.25 inches. This cylinder also includes a reinforced O-ring tube seal, a cold-drawn tube to maximize seal life, a 1-inch diameter zinc-plated steel pin, a high-tensile ground and polished chrome-plated rod, and an ASTM A536 65-45-12 ductile iron piston. And because it’s a WEN product, your cylinder comes backed by a two-year warranty and a friendly customer help line, all to make sure you remember WEN.
-
WEN Cross Tube Hydraulic Cylinder with 3.5-inch Bore and 8-inch Stroke
$135.43Read moreRemember when you had a cylinder that lasted? Maximize reliability in agriculture, construction, manufacturing, machinery, and more with a WEN Hydraulic Cylinder. This double-acting cross tube hydraulic cylinder withstands operating pressures of up to 3000 PSI. The SAE-8 port (3/4 inch-16UNF) attaches easily to the hydraulic hose of your choice. With a 3.5-inch bore and a 8-inch stroke, this durable cylinder goes from a retracted length of 18 inches all the way out to an extended length of 26 inches. This cylinder also includes a reinforced O-ring tube seal, a cold-drawn tube to maximize seal life, a 1.5-inch diameter zinc-plated steel pin, a high-tensile ground and polished chrome-plated rod, and an ASTM A536 65-45-12 ductile iron piston. And because it’s a WEN product, your cylinder comes backed by a two-year warranty and a friendly customer help line, all to make sure you remember WEN.
-
WEN Products Variable Speed 6.3-Amp Drywall Sander with Mid-Mounted Motor
$162.29Read moreRemember when you could sand those hard to reach places? The WEN Variable Speed Drywall Sander goes where no sander has gone before. With a pivoting 8.5-inch head that swivels in all directions, the WEN Drywall Sander automatically adjusts to be flush against every surface that crosses its path. The 6.3-amp motor is mounted in the middle of the sander to decrease the weight of the sanding head and improve the sander’s balance, making it easy to handle and preventing fatigue. Adjust the speed anywhere from 1000 to 2450 RPM to meet the needs of the project at hand. The hook and loop base pad makes sandpaper changes a breeze. This package includes six pieces of 9-inch hook and loop sandpaper disks (60, 80, 120, 150, 180 and 240 grit) along with a flexible dust vacuum hose for reliable dust removal. The improved hole configuration places the sandpaper holes directly below the included 15-foot dust hose, maximizing dust collection and minimizing cleanup. NOTE: only compatible with replacement sandpaper models DW80SP, DW120SP, and DW240SP. This drywall sander measures in at 64.5 x 11.5 x 10.25 inches in size, with a weight of 9.7 pounds. And because it’s a WEN product, your variable speed drywall sander comes backed by a two-year warranty, a stocked inventory of replacement parts, and a friendly customer helpline. Remember when you could reach the unreachable? Remember WEN.
-
WEN Variable Speed 5-Amp Drywall Sander with 15-Foot Hose, Corded, 6369
$82.51Add to cartRemember when you could sand those hard-to-reach places? The WEN Variable Speed Drywall Sander goes where no sander has gone before. With a pivoting 8.5-inch head that swivels in all directions, the WEN Drywall Sander automatically adjusts to be flush against every surface that crosses its path. Adjust the speed anywhere from 600 to 1500 RPM to meet the needs of the project at hand. The hook-and-loop base pad makes sandpaper changes a breeze while the foldable design allows for simple storage and transportation. The lightweight body telescopes to reach up to five feet away. This package also includes six hook-and-loop sandpaper disks (60, 80, 120, 150, 180 and 240 grit) along with a flexible dust vacuum hose that stretches up to 15 feet for reliable dust removal. Because it’s a WEN product, your sander comes backed by a two-year warranty, a nationwide network of skilled service technicians and a friendly customer helpline. Remember when you could reach the unreachable? Remember WEN.
Products
-
60" Mantel Shelf with Optional Corbels
$135.83
-
HART 20-Volt Brushless Orbital Jig Saw (Battery Not Included)
$98.54
-
KRAUS Natura Square Semi-Recessed Composite Bathroom Sink with Matte Finish and Nano Coating in White
$75.11
-
KRAUS Ansel Dual Function Pull-Down Kitchen Faucet, Chrome Finish
$117.12
-
Kraus Spot Free Bolden™ 18-Inch Commercial Kitchen Faucet with Soap Dispenser in all-Brite™ Stainless Steel Finish
$177.07
