DW235G 1/2" (13mm) VSR Drill 
DuraVent 6DP-36 Galvanized 6in Inner Diameter 
Central Tools 6434 Sleeve Height and Counter Bore Gauge 
Sparco Folding Platform Truck, Gray 
Gearwrench - 85063 - 1/2" Drive Micrometer Torque Wrench 20-150 ft/lbs. 
KRAUS Copper Illusion Glass Vessel Sink in Brown with Pop-Up Drain and Mounting Ring in Oil Rubbed Bronze 
CALIBRATION GUAGE FOR 8500 
Envion Therapure 230H, UV Germicidal HEPA Style Air Purifier, White 
45-PIECE SPLINE SOCKET SET 
Tiger Electronic JNP-1000 5.5 Cup Rice Cooker 
Flash Furniture Black Folding Table Dolly for Round Folding Tables 
3/8" PREMIUM AIR RATCHET 
KIT 4PC BODY & FENDER REPAIR TOOLS 
Yost Model 750-Di 
Mitutoyo Digimatic Micrometer, 293-832-30 
Mayne Manchester Mail Post - Black 
Cadet 63314 5.75 x 14 in. 240V Register Plus Fan Forced Heater - White 
MSD Platinum 16R 330W 16 R Moving Head Stage Lighting Studio Lamp 
Bon Chef 60006 13.25 in. dia. Cucina Braiser Pan with Lid & Induction Bottom, 3.5 quart 
M-d Products 92288 24" SmartTool Digital Level 
Winflo 30'' 400 CFM Convertible Wall Mount Range Hood 
Mr. Heater MH60QFAV 60K BTU Forced Air Propane Heater (Heats 1,500 SQ.FT) Category: Measuring & Layout Tools
Measuring & Layout Tools
Showing 1–16 of 31 results
-
ACDelco GM Original Equipment Front Passenger Side Disc Brake Caliper Assembly 172-2404
$142.78Add to cartACDelco GM Original Equipment Disc Brake Calipers are hydraulic components mounted over the brake rotor. The caliper acts as a clamp to press the brake pads against the brake rotor when the brakes are applied. These original equipment disc brake calipers have been manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors.
-
Baseline 2-sided medical skinfold caliper w/case
$138.38Add to cartBaseline® dual-sided medical skinfold caliper is made of lightweight aluminum and comes with protective carrying case. “Floating tips” to assure accurate and reproducible results. The caliper has a large, easy-to-read 70mm scale on each side. This feature facilitates right and left handed uses. The dual sided skinfold caliper comes standard with a calibration block.
-
Baseline 360 degree clear plastic goniometer joint angle and range of motion measurer
$141.98Add to cartTransparent plastic finger goniometer permits observation of joint?s axis of motion, and its range of motion. The head has three scales ranging from 30°hyperextensions through 120° flexion calibrated to be used with the ISOM (International Standards of Measurement, STFR) system. Arm has a linear scale in inches and centimeters and remains at measurement position until reset. Angle scale reads 1° increments. Finger – Flexion to Hyper-Extension, 25-pack
-
Baseline 360 degree clear plastic goniometer joint angle and range of motion measurer
$166.18Add to cartTransparent HiResâ„¢ plastic finger goniometer permits observation of joint?s axis of motion, and its range of motion. The HiResâ„¢ design ads a white line behind measurement gradations to make the readings easy to see. The head has three scales ranging from 30°hyperextensions through 120° flexion calibrated to be used with the ISOM (International Standards of Measurement, STFR) system. Arm has a linear scale in inches and centimeters and remains at measurement position until reset. Angle scale reads 1° increments. Finger – HiResâ„¢ Flexion to Hyper-Extension, 25-pack
-
Baseline 360 degree clear plastic goniometer joint angle and range of motion measurer
$118.08Add to cartTransparent plastic goniometer permits observation of joint?s axis of motion, and its range of motion. The 360° head has three scales calibrated to be used with the ISOM (International Standards of Measurement, STFR) system. Arm has a linear scale in inches and centimeters and remains at measurement position until reset. Angle scale reads 1° increments. 360 Degree Head – 8 inch Arms, 25-pack
-
Baseline 360 degree clear plastic goniometer joint angle and range of motion measurer
$145.80Add to cartTransparent HiResâ„¢ plastic goniometer permits observation of joint?s axis of motion, and its range of motion. The HiResâ„¢ design ads a white line behind measurement gradations to make the readings easy to see. The 360° head has three scales calibrated to be used with the ISOM (International Standards of Measurement, STFR) system. Arm has a linear scale in inches and centimeters and remains at measurement position until reset. Angle scale reads 1° increments. HiResâ„¢ 360 Degree Head – 8 inch Arms, 25-pack
-
Baseline 360 degree clear plastic goniometer joint angle and range of motion measurer
$132.31Add to cartTransparent HiResâ„¢ plastic goniometer permits observation of joint?s axis of motion, and its range of motion. The HiResâ„¢ design ads a white line behind measurement gradations to make the readings easy to see. The 360° head has three scales calibrated to be used with the ISOM (International Standards of Measurement, STFR) system. Arm has a linear scale in inches and centimeters and remains at measurement position until reset. Angle scale reads 1° increments. HiResâ„¢ 360 Degree Head – 6 inch Arms, 25-pack
-
Baseline Absolute+Axis attachment for 360 degree plastic goniometers, 12 inches, 25 each
$127.84Add to cartBaseline? Absolute+Axis? Goniometer attachment is a removable attachment piece to be attached to any 12″ plastic goniometer (sold separately). When attached to the end of one goniometer arm, the standard goniometer is transformed into an Absolute+Axis? goniometer. The Absolute+Axis? (AA) goniometer establishes a “true” vertical or horizontal to the start point of a measurement. Many goniometric measurements require one arm of the goniometer to be positioned either horizontally or vertically. The other arm is then lined-up with the patient’s body part. Until now, the practitioner had to “assume” or “eyeball” the vertical or horizontal position. This interpolation is often incorrect and introduces measurement error. The Absolute+Axis? goniometer removes measurement variability and allows the practitioner to concentrate on correct placement of the other goniometer arm and the patient’s body position. Some measurements the AA goniometer is designed to improve are: shoulder and hip rotation (internal, external); cervical flexion, extension, rotation and side bending; hamstring flexibility; and active ROM.
-
Baseline AcuAngle inclinometer, 2 each
$120.50Add to cartAcuAngle® Inclinometer with adjustable feet is used to measure range-of-motion (ROM). Standards are codified in the AMA Guide to the Evaluation of Permanent Impairment, third edition. Place inclinometer near joint to be measured; turn dial until scale reads 0; take joint through its range; read range traveled directly from dial. Adjustable feet along scale (side-to-side) adapt to body contours. Some neck and back measurement protocols require the simultaneous use of 2 inclinometers.
-
Baseline digital inclinometer, 2 each
$145.68Add to cartDigital Inclinometer with fixed feet is used to measure range-of-motion (ROM). Place inclinometer near the joint to be measured; press “zero” button; move joint through its range; press the “hold” button. Read measurements on LCD. Uses 1 x 3v CR2032 battery (included). Some neck and back measurement protocols require the simultaneous use of 2 inclinometers.
Products
-
60" Mantel Shelf with Optional Corbels
$135.83
-
HART 20-Volt Brushless Orbital Jig Saw (Battery Not Included)
$98.54
-
KRAUS Natura Square Semi-Recessed Composite Bathroom Sink with Matte Finish and Nano Coating in White
$166.05
-
KRAUS Ansel Dual Function Pull-Down Kitchen Faucet, Chrome Finish
$156.20
-
Kraus Spot Free Bolden™ 18-Inch Commercial Kitchen Faucet with Soap Dispenser in all-Brite™ Stainless Steel Finish
$177.07
