Category: Home Improvement
Home Improvement
Showing 865–880 of 904 results
-
WEN 4.3-Amp 4 x 36-Inch Belt and 6-Inch Disc Sander with Cast Iron Base, 6502T
$97.20Add to cartRemember when you needed a versatile and reliable sander? The WEN Belt Disc Sander easily sands, smooths and removes all of the jagged edges and splinters on your wood and lumber. With a 4.3 amp 1/2 HP motor, users should anticipate enough power to prevent this machine from bogging down under a large load. Changing the spacious 4-inch-by-36-inch belt is a breeze, so you?ll have the power to switch and replace sand paper grits as needed without wasting any time. The belt also tilts anywhere from 0 to 90 degrees to accommodate the needs of your particular workpiece while the heavy cast-iron base prevents vibrations. With all of this in addition to the 6-inch side disc, you?ll have the capacity to sand whatever your heart desires. The sanding disc is accompanied by a sturdy cast-aluminum work table. Included with the belt disc sander is a miter gauge for steady sanding on angled edges, a stop bar for safety and control, and a 2.25 inch dust port to connect a dust extractor. And because this is a WEN Product, your purchase comes backed by a two-year warranty, a nationwide network of skilled experienced technicians, and a helpful customer service line all to make sure that you remember WEN.
-
WEN 5-Amp Cast Iron Bench Mortiser with Chisel Bit Set, 43012
$178.20Read moreRemember when your holes were square? Strengthen your workpieces with the WEN Benchtop Mortising Machine. Our powerful 5-amp motor provides you up to 1725 rotations per minute, making easy work out of even the toughest of woods. The spacious chuck accepts bits anywhere from 1/32 of an inch to 1/2 of an inch (1/4 to 1/2 inch for chisel bits), giving you the versatility needed to take on any project. With spindle travel of 4-1/4 inches and a max stock thickness of 4 inches, you’ll be able to create sturdy and reliable mortises up to 3 inches in depth. The pneumatic spring head returns easily and smoothly while the spring-loaded fence allows for both fine-tune and large scale adjustments. The spacious table measures in at 13-1/2 by 6 inches with a work-piece hold down that accepts boards up to 3-1/2 inches thick. The adjustable feed handle rotates freely to prevent collision with your workpiece, springing back into place once you select your optimal start and stop points. The onboard depth stop prevents you from drilling past your intended distance. The spring-loaded protective chip guard easily flips up and down depending on your current needs. This package also includes three chisel bits, measuring in at 1/4, 3/8 and 1/2 inch in size, along with an extra chuck extension adapter, a 3/4-inch chisel bushing, and a 10 by 8-inch cast iron base. And because its a WEN mortiser, your bench top mortising machine comes backed by a two-year warranty, a nationwide network of skilled service technicians, and a friendly customer help line, all to make sure you remember WEN.
-
WEN 5-in-1 Pneumatic Multi-Function Tool with Scraper, Shovel, and Chisel Attachments
$150.69Read moreRemember when you could dig holes and demolish walls? Power through dirt, rock, brick, linoleum and more with the WEN 5-in-1 Pneumatic Multi-Tool. This versatile air-powered shovel and chisel attaches to your favorite air compressor via the onboard 1/4-inch 18 NPT coupling, providing you an arsenal of bits at your disposal. Pop on one of the four included chisels and scrapers for easy remodeling and demolition, or install the shovel blade to make quick work of any garden job. And, because its a WEN Product, your Pneumatic Multi-Tool comes backed by a two-year warranty, a nationwide network of skilled service technicians, and a friendly technical support line, all to make sure you remember WEN.
-
WEN 600-Pound Capacity Portable Clamping Saw Horse Work Bench with Non-Marring Jaws
$139.85Read moreRemember when you had the ultimate portable work station? It’s time to add some support to your workshop with the WEN Clamping Saw Horse. Our robust non-marring 8-by-3-inch jaws open up to 40 inches while the sturdy steel-frame construction supports up to 600 pounds, accommodating even the largest workpieces. The easy-to-use foot pedal provides hands-free operation, clamping down on workpieces with up to 2200 pounds of force. Our conveniently collapsible design folds down to 31 by 14.5 by 12.75 inches. Combine that with the onboard carrying handle for easy transportation and storage between uses. Easily transform this saw horse into a portable work station or miter saw stand by clamping in a piece of plywood. And because it’s a WEN product, your clamping saw horse comes backed by a two-year warranty, a stocked inventory of replacement parts and a friendly customer help line. Remember when you had support wherever you needed it? Remember WEN.
-
WEN Clevis Hydraulic Cylinder with 2-inch Bore and 30-inch Stroke
$103.58Read moreRemember when you had a cylinder that lasted? Maximize reliability in agriculture, construction, manufacturing, machinery, and more with a WEN Hydraulic Cylinder. This double-acting clevis hydraulic cylinder wtihstands operating pressures of up to 3000 PSI. The SAE-6 port (9/16 inch-18UNF) attaches easily to the hydraulic hose of your choice. With a 2-inch bore and a 30-inch stroke, this durable cylinder goes from a retracted length of 40.25 inches all the way out to an extended length of 70.25 inches. This cylinder also includes a reinforced O-ring tube seal, a cold-drawn tube to maximize seal life, a 1-inch diameter zinc-plated steel pin, a high-tensile ground and polished chrome-plated rod, and an ASTM A536 65-45-12 ductile iron piston. And because it’s a WEN product, your cylinder comes backed by a two-year warranty and a friendly customer help line, all to make sure you remember WEN.
-
WEN Cross Tube Hydraulic Cylinder with 3.5-inch Bore and 8-inch Stroke
$135.43Read moreRemember when you had a cylinder that lasted? Maximize reliability in agriculture, construction, manufacturing, machinery, and more with a WEN Hydraulic Cylinder. This double-acting cross tube hydraulic cylinder withstands operating pressures of up to 3000 PSI. The SAE-8 port (3/4 inch-16UNF) attaches easily to the hydraulic hose of your choice. With a 3.5-inch bore and a 8-inch stroke, this durable cylinder goes from a retracted length of 18 inches all the way out to an extended length of 26 inches. This cylinder also includes a reinforced O-ring tube seal, a cold-drawn tube to maximize seal life, a 1.5-inch diameter zinc-plated steel pin, a high-tensile ground and polished chrome-plated rod, and an ASTM A536 65-45-12 ductile iron piston. And because it’s a WEN product, your cylinder comes backed by a two-year warranty and a friendly customer help line, all to make sure you remember WEN.
-
WEN Products Variable Speed 6.3-Amp Drywall Sander with Mid-Mounted Motor
$93.15Read moreRemember when you could sand those hard to reach places? The WEN Variable Speed Drywall Sander goes where no sander has gone before. With a pivoting 8.5-inch head that swivels in all directions, the WEN Drywall Sander automatically adjusts to be flush against every surface that crosses its path. The 6.3-amp motor is mounted in the middle of the sander to decrease the weight of the sanding head and improve the sander’s balance, making it easy to handle and preventing fatigue. Adjust the speed anywhere from 1000 to 2450 RPM to meet the needs of the project at hand. The hook and loop base pad makes sandpaper changes a breeze. This package includes six pieces of 9-inch hook and loop sandpaper disks (60, 80, 120, 150, 180 and 240 grit) along with a flexible dust vacuum hose for reliable dust removal. The improved hole configuration places the sandpaper holes directly below the included 15-foot dust hose, maximizing dust collection and minimizing cleanup. NOTE: only compatible with replacement sandpaper models DW80SP, DW120SP, and DW240SP. This drywall sander measures in at 64.5 x 11.5 x 10.25 inches in size, with a weight of 9.7 pounds. And because it’s a WEN product, your variable speed drywall sander comes backed by a two-year warranty, a stocked inventory of replacement parts, and a friendly customer helpline. Remember when you could reach the unreachable? Remember WEN.
-
WEN Variable Speed 5-Amp Drywall Sander with 15-Foot Hose, Corded, 6369
$137.00Add to cartRemember when you could sand those hard-to-reach places? The WEN Variable Speed Drywall Sander goes where no sander has gone before. With a pivoting 8.5-inch head that swivels in all directions, the WEN Drywall Sander automatically adjusts to be flush against every surface that crosses its path. Adjust the speed anywhere from 600 to 1500 RPM to meet the needs of the project at hand. The hook-and-loop base pad makes sandpaper changes a breeze while the foldable design allows for simple storage and transportation. The lightweight body telescopes to reach up to five feet away. This package also includes six hook-and-loop sandpaper disks (60, 80, 120, 150, 180 and 240 grit) along with a flexible dust vacuum hose that stretches up to 15 feet for reliable dust removal. Because it’s a WEN product, your sander comes backed by a two-year warranty, a nationwide network of skilled service technicians and a friendly customer helpline. Remember when you could reach the unreachable? Remember WEN.
-
WEN Variable Speed 5-Amp Dual-Head Drywall Sander with 15-Foot Hose, Corded, 6377
$118.86Read moreTwo heads are better than one with the WEN Variable Speed Dual-Head Drywall Sander. With a pivoting head that swivels in all directions, the WEN Drywall Sander automatically adjusts to be flush against every surface that crosses its path. Swap on either the circular head or the triangular head depending on the task at hand. Both heads easily detach and install without the aid of any outside tools. Simply slide back the release latch, pick the desired pad shape and get sanding. Adjust the speed anywhere from 600 to 1500 RPM to meet the needs of the project at hand.
-
Weston 52-0601-W 8000 RPM Archery Carbon Arrow Cutting Saw with Dust Collector
$160.13Read moreFor discerning archers, having the perfect arrows can be just as important as having the perfect bow or perfect draw. Cut your arrows with the same precision you put into your aim with the Weston 8000 RPM Carbon Arrow Cutting Saw with Dust Collector. This Weston arrow saw is ideal for cutting carbon arrows and all other arrow shafts, while the built in dust collector will clean up your dust and debris. It features both 1.25 inch and 2.25 inch dust collector adapters so you can hook up your vacuum or shop vac (not included). This arrow saw also features an integrated measuring scale for accurate cuts, precision ball bearing spin testers, and an easy to change replacement.
-
WESTWARD 2ZA59 Digital Caliper,0-6 In,1.56 In Deep Jaw
$96.30Read moreOD/ID Digital Caliper, Caliper Range 0-6 in /0-150mm, Resolution 0.0005 in / 0.01 mm, IP Rating IP40, SPC Output No, Accuracy +/-0.001 in/0.02 mm, Caliper Material Stainless Steel, Absolute Positioning Yes, Jaw Depth 1 9/16 in, Long Form Calibration Certificate No Features Jaw Depth: 1 9/16 in IP Rating: IP40 Caliper Material: Stainless Steel Absolute Positioning: Yes SPC Output: NO Caliper Grouping: Digital Caliper Accuracy: +/-0.001 in/0.02 mm Long Form Calibration Certificate: No Resolution: 0.0005 in / 0.01 mm Caliper Range: 0-6 in /0-150mm Item: OD/ID Digital Caliper Dust Resistant: No Jaw Shape: Standard Measurements: 4-Way Dimension Type: Inch/Metric With Locking Nut: Yes Non-Magnetic: No Measures Depth: Yes Minimum Measurement – Inch: 0 in Maximum Measurement – Inch: 6 in Jaw Material: Steel Depth Rod Shape: Rectangular Maximum Measurement – mm: 150 mm Left-Handed Operation: No Repeatability: 1 division Linear Encoder Type: Electrostatic Capacitance Measures Step: Yes Case Type: Plastic Battery Size: CR2032 Minimum Measurement – Fractional Inch: 0 in Minimum Measurement – mm: 0 mm Measures Outside Dimension: Yes Coolant Resistant: No Range: 0 to 150 mm, 0 to 6 in Measures Inside Dimension: Yes Jaw Actuation Type: Thumb Wheel Includes Battery: Yes Includes Case: Yes Jaw Depth – Upper Jaw: 23/64 in Display Type: LCD Item Type: OD/ID Digital Caliper Brand: WESTWARD Manufacturer Part Number: 2ZA59
-
WESTWARD 6XY13 Square Set,4 Pc,Body 4,6,9,12 In L
$151.94Read morePrecision Steel Square Set, Material Carbon Tool Steel, Angle 90 Degrees , Number of Pieces 4, Outside Dimensions 4 in x 3 in; 6 in x 4 in; 9 in x 6 in; 12 in x 8 in, Case Included Yes, Construction Steel, Graduations True 90 Deg Angles Inside and Outside, Blade Length Measured From Inner Edge of Beam to End of Blade, Squareness – Inch 0.0006 in to 0.0012 in, With Wide Base No Features Number of Pieces: 4 Includes: 4, 6, 9, and 12 in Squares Material: Carbon Tool Steel Construction: Steel Squareness (In.): 0.0006 in to 0.0012 in Item: Precision Steel Square Set Characteristics: True 90 Deg Angles Inside and Outside, Blade Length Measured From Inner Edge of Beam to End of Blade Case Included: Yes With Wide Base: No Outside Dimensions: 4 in x 3 in; 6 in x 4 in; 9 in x 6 in; 12 in x 8 in Angle: 90 Degrees Graduations: True 90 Deg Angles Inside and Outside, Blade Length Measured From Inner Edge of Beam to End of Blade Squareness – Inch: 0.0006 in to 0.0012 in Item Type: Precision Steel Square Set Brand: WESTWARD Manufacturer Part Number: 6XY13
-
WHEELER-REX 60211 Threading Die,Right Hand,1/2in to 3/4in
$144.28Add to cartPipe Threading Replacement Dies, Pipe Dies Set for Threading Machine Die Heads, For Nominal Pipe Size 1/2 in to 3/4 in, Threads per Inch 14, Die Material/Type Alloy Steel, Pipe Thread Type NPT, Thread Direction Right Hand, For Use With 7991, Mfr. No. 70131, Number of Pieces in Set 4, Threading Die Features Nominal Conduit/Pipe: 1/2″ to 3/4″ Item: Threading Die Number of Pieces in Set: 4 Pipe Thread Type: NPT Pipe Threading Product Grouping: Pipe Threading Replacement Dies Thread Direction: Right Hand Thread Type: NPT Threads per Inch: 14 Die Material/Type: Alloy Steel For Use With: 7991, Mfr. No. 70131 Pipe Threading – Item: Pipe Dies Set for Threading Machine Die Heads For Nominal Pipe Size: 1/2 in to 3/4 in Item Type: Threading Die Brand: WHEELER-REX Manufacturer Part Number: 60211
-
Whistler WIC-4750 Inspection Camera, 3.5″ LCD, w/Mic
$95.13Read moreInspection camera, MFG# 4750, with 3.5″ color LCD monitor with full video and image recording capabilities and built-in microphone. The 9mm camera tube is water, gas, diesel and oil proof. Includes image rotation and zoom capabilities.
-
Wide Ski Power Vise Swix Super Jaws 155 mm T0149-90N 2019
$188.68Read moreSwix Super Jaws Wide Ski Power Vise 155 mm T0149-90N Slightly modified clamp design for better alignment of the 3-piece vise set in 2019. 3-piece all-metal ski vise, built to last. Central clamp opens from 50 mm to 155 mm. 90 mm wide clamp pads. Clamps to workbenches up to 2.25 in. thick. Adjustable end supports. Wide Ski Power Vise Swix Super Jaws 155 mm T0149-90N 2019
-
Wilton ATV All-Terrain Vise, 6 in Jaw, 5 in Throat, Stationary Base
$154.91Read moreATV ALL TERRAIN VISEFits a standard 2″ hitch and includes a hitch pin for security; Can be mounted on a bench or trailer for even greater versatility.; Lightweight and with an integrated carrying handle, the ATV is designed for easy transport; Patented 360° locking handle secures the handle while driving or repositions it while working; The included set screws are designed to provide a tight fit in the hitch and reduce vibration while driving; Ideal working height doesn’t interfere with truck bed or tailgate; Jaws are replaceable and include a v-groove for vertical clamping of round objects; 60,000 PSI ductile iron body; Model Number: 10010
Products
-
60" Mantel Shelf with Optional Corbels
$135.83
-
HART 20-Volt Brushless Orbital Jig Saw (Battery Not Included)
$98.54
-
KRAUS Natura Square Semi-Recessed Composite Bathroom Sink with Matte Finish and Nano Coating in White
$166.05
-
KRAUS Ansel Dual Function Pull-Down Kitchen Faucet, Chrome Finish
$156.20
-
Kraus Spot Free Bolden™ 18-Inch Commercial Kitchen Faucet with Soap Dispenser in all-Brite™ Stainless Steel Finish
$177.07
Top rated products
-
Bostitch Pneumatic Low Profile 30 deg. Framing Nailer
$170.91
-
HART 20-Volt 18-Gauge 2-Inch Brad Nailer Kit
$102.06
-
UFP K71-778-01 LH DB42 Old Style Caliper Replacement Kit
$131.15
-
5 and 30-Gallon Drum Dolly by Pentagon Tool - Heavy Duty Steel - 1000lb Capacity, 4-Pack (Silver)
$65.92
-
Honeywell 0.61 cu. ft. Water-Resistant Steel Fire and Security Safe, 2103
$188.37