Category: Home Improvement
Home Improvement
Showing 849–864 of 904 results
-
WEN 10-Gallon Oil-Free Vertical Air Compressor
$157.95Read moreThe WEN 10-Gallon Oil-Free Vertical Air Compressor is the perfect companion for the garage, the job site or the work shop. Plug in nailers, staplers, spray guns or any other pneumatic tool for a versatile set-up that answers a variety of needs. The rubber-gripped handle and the two seven-inch never-flat wheels make transportation and storage easy while the 1/4-inch NPT quick-coupler air outlet allows for quick hose changes. The 15-Amp motor and the reinforced steel tank provide a max pressure of up to 150 PSI. The auto-shut-down function turns the compressor off once it reaches its max PSI. The oil-free design requires no external lubrication from users while the easy-to-reach drain valve makes for easy release of built-up air and condensation. This single-stage compressor boasts air flow rates of 4.0 CFM at 90 PSI and 5.0 CFM at 40 PSI.
-
WEN 10-Inch Variable Speed Drill Press, 4212
$156.34Read moreThe Wen 10″ Variable Speed Drill Press is packed with features that you’ll find in larger, industrial-type products to make it a powerhouse for your shop. It offers a highly variable speed range that you can adjust to anywhere between 530 and 3,100 RPMS. This Wen drill press is capable of delivering equal torque throughout its entire RPMS range. It also features a laser centering device to help you perform accurate drilling operations. The LED display shows your current speed, and the spindle travel’s adjustable depth stop shows clear depth measurements. Use the Wen 10″ Variable Speed Drill Press to enhance your construction and craft projects.
-
WEN 12-Inch Benchtop Disc Sander with Miter Gauge and Dust Collection System
$123.12Add to cartRemember when you could sand giant workpieces? Take on the biggest and the baddest with the WEN 12-Inch Benchtop Disc Sander. Our powerful 8-amp motor features a direct-drive design to maximize torque during operation. The spacious 5.5-by-15.5-inch table bevels up to 45 degrees for angled pieces. Combine that with the sliding miter gauge for a versatile sander that meets the needs of a variety of projects. This package also includes a pre-installed adhesive-backed 60-grit sanding disc, an onboard 2-inch dust port, and a 2.5-inch-diameter dust hose. And because it’s a WEN product, your disc sander comes backed by a two-year warranty, a nationwide network of skilled service technicians, and a friendly technical support line, all to make sure you remember WEN.
-
WEN 15-Amp 10-Inch Single Bevel Compact Sliding Compound Miter Saw with Laser, MM1011
$175.58Read moreRemember when your miter saw could do it all? Create cuts at any angle with the WEN 10-Inch Single Bevel Sliding Compound Miter Saw. Our powerful 15-amp motor slices through even the hardest of woods, rotating the blade up to 4500 times per minute. This versatile saw miters up to 45 degrees in either direction and bevels up to 45 degrees to the left. Cut boards up to 12 inches wide and 3-1/2 inches thick or make compound cuts (45 degree bevel and 45 degree miter) in boards 8-1/4 inches wide and 2-1/5 inches thick. The saw features 9 positive miter stops: two at 15 degrees, two at 22.5 degrees, two at 30 degrees, two at 45 degrees and one at 0. However, if a more unique angle is preferred, the miter lock still allows the saw to lock at any angle between those stops. This spacious saw also features a 7-1/2-inch crown molding nested capacity and a 6-3/4-inch base board vertical capacity. The compact design makes for great portability and storage between uses. Measuring in at 17.5 by 28 by 16.5 inches, you?ll never have to worry about your rail system interfering with your wall again. This package also includes a 10-inch 40-tooth carbide-tipped blade (w/ 5/8-inch arbor), two table extensions, one clamp assembly, a class II laser guide, a dust port adapter, and a dust bag. The onboard laser illuminates the line of cut for maximum accuracy while the dust collection port allows for connection to either the included dust bag or your dust collection device of choice. And, because it?s a WEN product, your miter saw comes backed by a two-year warranty, a stocked inventory of replacement parts, and a friendly customer help line, all to make sure you remember WEN.
-
WEN 16-Inch Two-Direction Variable Speed Scroll Saw, 3921
$92.70Add to cartRemember when your scroll saw could cut in two different directions? Take on the most intricate and artful cuts with the WEN 16-Inch Variable Speed Two-Direction Scroll Saw. The 9/16-inch stroke saws through hard woods up to two inches thick. Adjust the speed anywhere from 550 to 1600 strokes per minute with the simple turn of a knob. The cast iron base prevents vibration and walking during operation while the spacious 16-by-10-inch table bevels up to 45 degrees for angled cut. The adjustable air pump clears saw dust from your work area to give you a clear line of vision as you cut. This combined with the 1-1/2-inch dust port keep your work area clean so you can focus on your woodworking. The saw also includes a hold-down foot clamp for securing your project in place along with a flexible work light that bends and adjusts to whatever position your heart desires. This unique blade holder accepts both pinned and pinless blades while also allowing users to change the direction of their cut to accommodate their particular workpiece. For pinned blades, simply pop the pins out of the front holder and turn the blade 90 degrees. Now, your cuts are no longer confined by the 16-inch throat of the scroll saw. On top of that, our removable pinless blade holder design tightly grips blades to prevent them from coming loose during operation. Onboard blade and holder storage creates simple organization solutions between jobs. And because its a WEN product, your scroll saw comes backed by a two-year warranty, a nationwide network of skilled service technicians and a friendly customer help line, all to make sure you remember WEN.
-
WEN 2-Axis Digital Readout Kit for Metal Lathes (compatible with WEN, Central Machinery, and Grizzly)
$126.94Read moreRemember when you could make finely-tuned and precise adjustments to your metal lathe? The WEN Digital Readout Kit installs easily to the cross slide and compound slide of your lathe to help you know the exact depth of your cut. Choose either inches or millimeters depending on your preferences. With maximum accuracy, you?ll be able to measure adjustments as small as 0.0005 inches or 0.01 mm in size. While this digital readout was designed with the WEN 3455 Metal Lathe in mind, its universal build will fit on the majority of 7-by-12-inch metal lathes on the market, including Grizzly model G8688 and Central Machinery models 93212 and 93799. And because it?s a WEN product, your digital readout kit comes backed by a two-year warranty, a nationwide network of skilled service technicians, and a friendly customer help line all to make sure you remember WEN.
-
WEN 2.5-Amp 9-Inch Benchtop Band Saw, 3959
$144.12Read moreRemember when you had a saw that was both compact and powerful? The WEN 9-Inch Benchtop Band Saw attacks boards with cuts up to 3-1/2 inches deep and 9 inches wide. The 2.5-amp motor rotates the included 1/4-inch blade at up to 2500 feet per minute. The design of this saw uses 59-1/2 inch blades anywhere from 1/8 to 3/8 inches in width for both intricate and powerful cuts. The spacious work table measures in at 12-1/4 x 11-7/8 inches in size and can be beveled up to 45 degrees. This package includes a miter gauge, an onboard 2-1/2 inch dust port, a fence for creating straight cuts, and an adjustable blade guard. Ball-bearings give the blade smooth operation and a long lasting life for years of dependable service. And because itâs a WEN product, your WEN 9-Inch Benchtop Band Saw comes backed by a two-year warranty, a nationwide network of skilled service technicians and a friendly and helpful customer phone line all to make sure you remember WEN.
-
WEN 2.8-Amp 9-Inch Benchtop Band Saw, 3939T
$187.61Read moreRemember when power tools were actually powerful? The WEN 9-Inch Benchtop Band Saw attacks boards with cuts up to 3-5/8 inches deep and 9 inches wide. The 2.8-amp motor rotates the included 3/8-inch blade at up to 2460 feet per minute. The design of this saw uses 62-inch blades anywhere from 1/8 to 3/8 inches in width for both intricate yet powerful cuts. The spacious work table measures in at 12 x 12 inches in size and can be beveled up to 45 degrees. This package includes a handy carrying handle, a miter gauge, an onboard dust port, a fence for creating straight cuts, a and an adjustable blade guard. Ball-bearings give the blade smooth operation and a long lasting life for years of dependable service. And because it?s a WEN product, your WEN 9-Inch Benchtop Band Saw comes backed by a two-year warranty, a nationwide network of skilled service technicians and a friendly and helpful customer phone line all to make sure you remember WEN. Remember when you had a versatile and powerful woodworking saw? Remember WEN.
-
WEN 2500 PSI Tie Rod Hydraulic Cylinder with 2.5 in. Bore and 30 in. Stroke
$130.05Read moreRemember when you had a cylinder that lasted? Maximize reliability in agriculture, construction, manufacturing, machinery, and more with a WEN Tie-Rod Hydraulic Cylinder. This double-acting steel-welded tie-rod hydraulic cylinder creates operating pressures of 2500 PSI. The 3/8-inch NPT port size attaches easily to any standard hydraulic hose. With a 2.5-inch bore and a 30-inch stroke, this durable cylinder goes from a retracted length of 40.25 inches all the way out to an extended length of 70.25 inches. This cylinder also includes a reinforced O-ring tube seal, a cold-drawn tube to maximize seal life, a 1-inch diameter zinc-plated steel pin, a high-tensile ground and polished chrome-plated rod, an ASTM A536 65-45-12 ductile iron piston, and ductile iron female clevises with grade 8 clamp nuts. And because it’s a WEN product, your tie rod cylinder comes backed by a two-year warranty, a stocked inventory of replacement parts and a two-year warranty, all to make sure you remember WEN.
-
WEN 2500 PSI Tie Rod Hydraulic Cylinder with 2.5 in. Bore and 36 in. Stroke
$137.91Read moreRemember when you had a cylinder that lasted? Maximize reliability in agriculture, construction, manufacturing, machinery, and more with a WEN Tie-Rod Hydraulic Cylinder. This double-acting steel-welded tie-rod hydraulic cylinder creates operating pressures of 2500 PSI. The 3/8-inch NPT port size attaches easily to any standard hydraulic hose. With a 2.5-inch bore and a 36-inch stroke, this durable cylinder goes from a retracted length of 46.25 inches all the way out to an extended length of 82.25 inches. This cylinder also includes a reinforced O-ring tube seal, a cold-drawn tube to maximize seal life, a 1-inch diameter zinc-plated steel pin, a high-tensile ground and polished chrome-plated rod, an ASTM A536 65-45-12 ductile iron piston, and ductile iron female clevises with grade 8 clamp nuts. And because it’s a WEN product, your tie rod cylinder comes backed by a two-year warranty, a stocked inventory of replacement parts and a two-year warranty, all to make sure you remember WEN.
-
WEN 2500 PSI Tie Rod Hydraulic Cylinder with 3.5 in. Bore and 30 in. Stroke
$179.15Read moreRemember when you had a cylinder that lasted? Maximize reliability in agriculture, construction, manufacturing, machinery, and more with a WEN Tie-Rod Hydraulic Cylinder. This double-acting steel-welded tie-rod hydraulic cylinder creates operating pressures of 2500 PSI. The 1/2-inch NPT port size attaches easily to any standard hydraulic hose. With a 3.5-inch bore and a 30-inch stroke, this durable cylinder goes from a retracted length of 40.25 inches all the way out to an extended length of 70.25 inches. This cylinder also includes a reinforced O-ring tube seal, a cold-drawn tube to maximize seal life, a 1-inch diameter zinc-plated steel pin, a high-tensile ground and polished chrome-plated rod, an ASTM A536 65-45-12 ductile iron piston, and ductile iron female clevises with grade 8 clamp nuts. And because it’s a WEN product, your tie rod cylinder comes backed by a two-year warranty, a stocked inventory of replacement parts and a two-year warranty, all to make sure you remember WEN.
-
WEN 3-in-1 Pneumatic 21-Degree, 28-Degree and 34-Degree Framing Nailer with Carrying Case
$97.81Read moreRemember when you had three nailers in one? Find the perfect angle with the WEN 3-in-1 Framing Nailer. Our unique design allows users to switch from 21 degrees to 28 degrees to 34 degrees depending on the needs of the task at hand. Fire 2 to 3-1/2 inch plastic-collated round-head framing nails at 21 degrees, or 2-3/16 to 3-1/2-inch wire- or paper-collated clipped-head framing nails at 28 or 34 degrees. Connect the air compressor of your choice to the 1/4-inch NPT air inlet, the nailer requiring 5.8 CFM of air at 90 PSI. The spacious magazine holds up to sixty 21-degree nails at a time, or up to ninety 28 or 34-degree nails. The removable non-marring tip prevents damage to your workpiece, while the firing selector lets you go from single to sequential firing modes with the simple flip of a switch. The hard-bodied carrying case provides an easy storage and transport solution between uses. The 9.4-pound body combines with the ergonomic rubber-backed handle to limit fatigue during long days on the job site. Onboard depth adjustment lets users select the exact depth they want their nail to fire. This nailer accepts smooth, ring, or screw shank nails ranging from .113 to .131 inches in diameter. And because it’s a WEN product, your 3-in-1 framing nailer comes backed by a two-year warranty, a stocked inventory of replacement parts, and a friendly technical support team, all to make sure you remember WEN.
-
WEN 3.2-Amp 8-Inch by 12-Inch Variable Speed Mini Benchtop Wood Lathe
$187.59Read moreRemember when you could turn your own pens? Fill your house with as many pens as you can with the WEN 8-Inch by 12-Inch Variable Speed Mini Wood Lathe. Adjust the variable speed anywhere from 750 to 3200 rotations per minute. The WEN 8-Inch by 12-Inch Variable Speed Benchtop Wood Lathe features an MT1 spindle and tailstock taper to tightly grip workpieces, two tool rests (4-1/2 inch and 7 inch) to provide needed support for chisels and tools during operation, and a 3.2-amp motor to keep things turning. The easy-to-use lever clamping system makes adjustments to both the tool rest and the tailstock simple and precise. The WEN Wood Lathe also includes a flat wrench, a headstock spur center, a tailstock cup center, a knockout rod and a 2.3-inch faceplate for non-spindle workpieces. And, because its a WEN product, your lathe comes backed by a two-year warranty, a nationwide network of skilled service technicians and a friendly customer help line. Remember when you could turn pens, chess pieces and more? Remember WEN.
-
WEN 3.5-Amp Oscillating Belt and Spindle Sander, 6524
$162.45Add to cartRemember when you were the king of the twist? Now you can make your belt oscillate without ever setting foot on a dance floor with the WEN Oscillating Belt and Spindle Sander. Sand arcs, curves, contours, faces and more of even the most strangely shaped workpieces. This versatile machine acts as both a spindle sander and a belt sander, oscillating up to 58 times per minute with a 5/8-inch stroke. This package includes five different spindle sanding sizes (1/2 inch, 3/4 inch, 1 inch, 1-1/2 inch and 2 inch) and one 4 x 24 inch belt. The powerful 3.5 amp motor rotates the various spindles up to 2000 times per minute and the belt up to 1575 feet per minute. Onboard storage helps to organize all of the throat plates, rubber sanding drums and table inserts included with this sander while the 1-1/2 inch dust port allows woodworkers to connect a dust collection system to minimize clean up. Adjust the table anywhere from 0 to 45 degrees to help take on angled edges and surfaces. This sander also comes with six pieces of 80 grit sandpaper: one for the belt and five for each respective size spindle diameter. And because its a WEN Product, your purchase comes backed by a two year warranty, a nationwide network of skilled service technicians and a friendly customer help line. It?s time to shake things up with the WEN Oscillating Belt and Spindle Sander. Remember when you could easily sand any curve or edge your heart desired? Remember WEN.
-
WEN 3.5-Amp Oscillating Spindle Sander, 6510T
$93.96Add to cartRemember when you used to have to sand those rounded edges by hand. With the WEN Oscillating Spindle Sander you’ll never have to face that problem again. This is the ultimate sanding tool for quickly and easily smoothing out arcs, curves, contours and odd shapes. The plates and drums are easy to swap in and out and the lightweight design allows for easy mobility if need be. However, just because the compact design weighs in at a mere 30 pounds does not mean that we’ve sacrificed power. The WEN Oscillating Spindle Sander features a smooth and quiet 1/2HP 3.5 Amp motor while the sanding spindle moves up to 58 oscillations and 2000 rotations per minute with a 5/8 inch stroke. Our package includes six sanding sleeve attachment sizes (1/2, 3/4, 1, 1-1/2, 2 and 3 inches) and five rubber drums to allow for a full range of curves to match whatever the situation calls for. Meanwhile, the onboard storage keeps the spindles, sleeves, table inserts and spindle washers organized and accessible for quick changes. The dust port provides the option to attach dust extractor to collect the airborne dust particles, ensuring a cleaner working surface and shop so you can keep building. And because it’s a WEN Product, our Oscillating Spindle Sander is also backed by a two-year warranty, a friendly and knowledgeable customer service hotline and a national network of experienced service technicians. It’s time to make any difficult sanding task a breeze, allowing for maximum creativity with any woodworking project. Remember when you could easily sand any curve or edge your heart desired.
Products
-
60" Mantel Shelf with Optional Corbels
$135.83
-
HART 20-Volt Brushless Orbital Jig Saw (Battery Not Included)
$98.54
-
KRAUS Natura Square Semi-Recessed Composite Bathroom Sink with Matte Finish and Nano Coating in White
$166.05
-
KRAUS Ansel Dual Function Pull-Down Kitchen Faucet, Chrome Finish
$156.20
-
Kraus Spot Free Bolden™ 18-Inch Commercial Kitchen Faucet with Soap Dispenser in all-Brite™ Stainless Steel Finish
$177.07
Top rated products
-
Frontier Tool Cart with one drawer and two trays. Dimensions 30.3 in.W x 16.3 in.D x 32.5 in.H
$89.38
-
Cosmo 30 in. Ducted Wall Mount Range Hood in Stainless Steel with Push Button Controls, LED Lighting and Permanent Filters
$170.91
-
AIRCAT 6in Self Vacuum Palm Sander 316in Orbit
$136.63
-
Senco PC1010 1-Horsepower Peak, 12 hp running 1-Gallon Compressor
$164.88
-
Replacement for CABLES AND SENSORS E708M-17P0
$102.18