Milwaukee M12 Grease Gun (Bare Tool)

Related products

• Sale!

  Quick View

  Milwaukee Electric Tools MLW2631-20 7.25 in. M18 Brushless Circular Saw – Bare Tool

  $182.47 $151.45

  M18 Brushless 7-1/4″ Circular Saw delivers up to 40% more power than circular saws with brushed motors while providing up to 30% more run-time. The Milwaukee built motor, REDLINK electronics and Redlithium XC5.0 battery provide more efficient power delivery, more power and fewer trips to the charger. With 5,000 RPM the 2631 provides smooth cutting, and at only 9.0 lbs, it is lighter than most corded saws. The 7-1/4″ Brushless Circular Saw also features an integrated rafter hook, magnesium guards, an aluminum shoe and LED light. FeaturesIntegrated rafter hook for easy storageMagnesium Upper and Lower GuardsLED light for increased accuracy and visibilityMilwaukee Brushless Motor:Optimized for efficiency, this motor delivers over 30% more run-time and longer life than brushed motors. Delivers 5,000 RPM for smooth, powerful cuttingREDLINK Intelligence:Advanced overload protection defends against abusive applications and monitors the temperature to prevent damage and ensure maximum tool & battery life.SpecificationsSize: 7.25 in.Weight: 9 lbs- SKU: ISN57567

  Add to cart

  wishlist
• Sale!

  Quick View

  Milwaukee Electric Tools MLW48-59-1811 M12 & M18 Super Battery Charger

  $132.99 $108.92

  The MILWAUKEE M18 & M12 Super Charger charges Milwaukee batteries up to 4X Faster than standard Milwaukee chargers, massively reducing downtime and maximizing productivity. The charger accepts all M18 & M12 batteries, providing an upgrade for both battery systems. M18 High Ouput batteries with premium charge components are particularly optimized for the Super Charger, with theM18 Redlithium High Ouput HD12.0 charging in only 1 hour. Featuring Redink Intelligence, the dual battery charger communicates directly with the battery to monitor cell voltage, temperature and charge status to optimize the performance and extend the life of the pack. The Super Charger also identifies the best charge rate for each battery pack inserted, meaning each pack will charge in the shortest amount of time possible. FeaturesCharges batteries up to 4x fasterCharges all M12 & M18 Batteries – Full system compatibilityCharges the M18 High Ouput HD12.0 in 1 hourSequential charging: automatically charges the second inserted pack once the first pack is fully charged80% charge indicator – the charger slowly flashes green when the battery reaches 80% state of chargeSpecificationsWeight: 3 lbs- SKU: ISN58809

  Add to cart

  wishlist
• Sale!

  Quick View

  Shop Vac 825-14-00 14 Gallon 6.5 HP Hardware Series SVX2 Wet & Dry Vacuum

  $162.74 $136.22

  W/D VAC 14GL 6.5PHP

  Read more

  wishlist
• Sale!

  Quick View

  Kreg K4MS Jig K4 Master System

  $208.92 $169.23

  The Do-It-Yourself Kreg Jig® with Bonus Accessories: The Kreg Jig® K4 Master System is a great choice for any woodworking enthusiast looking for a complete set to get started building with Kreg Joinery. With its solid clamp, large clamping recess, dust collection attachment, material support stop, and removable 3-hole drill guide, this jig truly has it all. The Master System includes a Kreg Jig® K4, Bonus Kreg Accessories: the Kreg Face Clamp, Portable Base, and more. Large Clamping Recess: The Large Clamping Recess makes it easy to secure your jig to your workbench using Kreg multi-purpose Face Clamps or any common bar clamp or C-clamp. Sturdy Toggle-Clamp: The Kreg Jig® K4’s rear-mounted clamp design has been around since the first Kreg Jig®. It’s a proven design, offering incredible rigidity and uncompromising workpiece hold-strength. Adjustments are as easy as releasing the locknut and rotating to the correct setting. 3 Tools in 1: Thanks to its removable Drill Guide, the Kreg Jig® K4 Master System can serve as many different tools: a sturdy benchtop jig that utilizes the benchtop base for high speed pocket holes, a contractor-grade jig for work on the road through the use of the portable base, and a high-quality repair jig when you add spacer blocks to the bottom of the drill guide. 3-Hole Drill Guide: The 3-hole Drill Guide lets you drill pocket holes in a wide variety of material widths and thicknesses from 1/2″ to 1 1/2″ in 1/8″ increments. Every Kreg Drill Guide features a hardened-steel core, which carries a lifetime guarantee. The core shrouds the bit and supports the workpiece through 100% of the drill-stroke, resulting in minimal bit deflection, reduced tear-out, and a clean, pluggable pocket hole. Material Support Stop: The Material Support Stop can be set at any distance from the jig to help you repeat the same pocket holes over and over again. The stop can also be swung out of the way to serve as a height support for larger panels. Glass-Reinforced Nylon Body: The blue body of every Kreg Jig® K4 is made from a heavy-duty, glass-reinforced nylon. This composite material offers the resiliency and flexibility you need without sacrificing the strength and durability Kreg customers have come to expect. Superior Angle: Unlike competing jigs with a shallower angle of approach, the Kreg Jig® K4 Master System features an optimized drilling angle, specifically designed to increase driving efficiency and minimize the overall size of the pocket hole. The result is a compact pocket hole, less than 1 1/2″ in size. Wood-Chip Relief: The Kreg Jig® K4 Master System includes one wood-chip relief hole for every Drill Guide hole, designed to keep the drill bit clear of excess wood chips, minimize drill torque, increase the longevity of your drill bits, and allow you to complete a perfect pocket hole in just one plunge. The Kreg Jig® K4 is the perfect choice for do-it-yourselfers and anyone new to pocket-hole joinery.  Build projects from wood the fast, strong, easy way using pocket-hole joinery and the Kreg Jig® K4. With the Kreg Jig, all you have to do is drill a hole in one of the pieces you want to join. Then drive in a Kreg Screw. The self-tapping tip draws the joint together and holds it tight, so you can create beautiful, durable projects quickly. Its simple design gives you the confidence you need to get started, and you’ll have your project finished in no time with joints as easy as “Drill. Drive. Done!”   The Master System includes a Kreg Jig® K4 and Bonus Kreg Accessories: the Kreg Face Clamp, Portable Base,  Dust Collection Attachment, and Material Support Stop.Kreg K4Ms Jig K4 Master System For use with materials 1/2″ to 1 1/2″ (12-38mm) thick in 1/8″ (3mm) incremental settings Works with solid wood and plywood Removable Drill Guide for benchtop and portable use Drill Guide includes 3-hole fixed spacing Dust-Collection Shroud collects wood chips as you work Material Support Stop for consistently repeating hole spacings Hardened-steel Kreg Drill Guides feature a lifetime warranty

  Add to cart

  wishlist