MAKITA XOB01Z 18V LXT® Random Orbit Sander

Related products

• Sale!

  Quick View

  WEN 4.3-Amp 4 x 36-Inch Belt and 6-Inch Disc Sander with Cast Iron Base, 6502T

  $117.44 $97.20

  Remember when you needed a versatile and reliable sander? The WEN Belt Disc Sander easily sands, smooths and removes all of the jagged edges and splinters on your wood and lumber. With a 4.3 amp 1/2 HP motor, users should anticipate enough power to prevent this machine from bogging down under a large load. Changing the spacious 4-inch-by-36-inch belt is a breeze, so you?ll have the power to switch and replace sand paper grits as needed without wasting any time. The belt also tilts anywhere from 0 to 90 degrees to accommodate the needs of your particular workpiece while the heavy cast-iron base prevents vibrations. With all of this in addition to the 6-inch side disc, you?ll have the capacity to sand whatever your heart desires. The sanding disc is accompanied by a sturdy cast-aluminum work table. Included with the belt disc sander is a miter gauge for steady sanding on angled edges, a stop bar for safety and control, and a 2.25 inch dust port to connect a dust extractor. And because this is a WEN Product, your purchase comes backed by a two-year warranty, a nationwide network of skilled experienced technicians, and a helpful customer service line all to make sure that you remember WEN.

  Add to cart

  wishlist
• Sale!

  Quick View

  Milwaukee M18 FUEL 1.25 hp Cordless Compact Router 18 volt 31000 rpm

  $131.59 $106.59

  Milwaukee M18 FUEL 1.25 hp Cordless Compact Router 18 volt 31000 rpm

  Add to cart

  wishlist
• Sale!

  Quick View

  WEN 3.5-Amp Oscillating Belt and Spindle Sander, 6524

  $196.20 $162.45

  Remember when you were the king of the twist? Now you can make your belt oscillate without ever setting foot on a dance floor with the WEN Oscillating Belt and Spindle Sander. Sand arcs, curves, contours, faces and more of even the most strangely shaped workpieces. This versatile machine acts as both a spindle sander and a belt sander, oscillating up to 58 times per minute with a 5/8-inch stroke. This package includes five different spindle sanding sizes (1/2 inch, 3/4 inch, 1 inch, 1-1/2 inch and 2 inch) and one 4 x 24 inch belt. The powerful 3.5 amp motor rotates the various spindles up to 2000 times per minute and the belt up to 1575 feet per minute. Onboard storage helps to organize all of the throat plates, rubber sanding drums and table inserts included with this sander while the 1-1/2 inch dust port allows woodworkers to connect a dust collection system to minimize clean up. Adjust the table anywhere from 0 to 45 degrees to help take on angled edges and surfaces. This sander also comes with six pieces of 80 grit sandpaper: one for the belt and five for each respective size spindle diameter. And because its a WEN Product, your purchase comes backed by a two year warranty, a nationwide network of skilled service technicians and a friendly customer help line. It?s time to shake things up with the WEN Oscillating Belt and Spindle Sander. Remember when you could easily sand any curve or edge your heart desired? Remember WEN.

  Add to cart

  wishlist
• Sale!

  Quick View

  Makita 9564CV – SJS 4-1/2" 120V 13A Corded Variable Speed Angle Grinder

  $191.83 $162.29

  Angle Grinder, Wheel Dia. 4-1/2 In., Nominal Amps 12, No Load RPM 2800 to 10,500, Switch Type Slide, Lock-on Yes, Lock-off No, Voltage 120VAC, Spindle Thread Size 5/8 In.-11, Tool Length 11-3/4 In., Tool Weight 5.3 lbs, Speed Type Variable, Handle Design Barrel Grip, Cord Length 10.0 ft., Number of Conductors 2, Features Labyrinth Construction, Sjs (Mechanical Clutch), Variable Speed, Electronic Speed Control, Includes Wrench, Guard, Backing Flange, Side Handle and Clamp Nut for 7/8 In. WheelsFeaturesHandle Design: Barrel GripTool Length: 11-3/4″Number of Conductors: 2Speed Type: VariableItem: Angle GrinderFeatures: Labyrinth Construction, Sjs (Mechanical Clutch), Variable Speed, Electronic Speed ControlCorded/Banded: CordedLock-off: NoCord Length: 10.0 ft.Voltage: 120VACCorded/Cordless: CordedTool Weight: 5.3 lbsIncludes: Wrench, Guard, Backing Flange, Side Handle and Clamp Nut for 7/8″ WheelsSpindle Thread Size: 5/8″-11Switch Type: SlideLock-on: YesWheel Dia.: 4-1/2″No Load RPM: 2800 to 10,500Nominal Amps: 12

  Add to cart

  wishlist