Category: Hand Tools
Hand Tools
Showing 65–80 of 278 results
-
Baseline 2-sided medical skinfold caliper w/case
$138.38Add to cartBaseline® dual-sided medical skinfold caliper is made of lightweight aluminum and comes with protective carrying case. “Floating tips” to assure accurate and reproducible results. The caliper has a large, easy-to-read 70mm scale on each side. This feature facilitates right and left handed uses. The dual sided skinfold caliper comes standard with a calibration block.
-
Baseline 360 degree clear plastic goniometer joint angle and range of motion measurer
$141.98Add to cartTransparent plastic finger goniometer permits observation of joint?s axis of motion, and its range of motion. The head has three scales ranging from 30°hyperextensions through 120° flexion calibrated to be used with the ISOM (International Standards of Measurement, STFR) system. Arm has a linear scale in inches and centimeters and remains at measurement position until reset. Angle scale reads 1° increments. Finger – Flexion to Hyper-Extension, 25-pack
-
Baseline 360 degree clear plastic goniometer joint angle and range of motion measurer
$166.18Add to cartTransparent HiResâ„¢ plastic finger goniometer permits observation of joint?s axis of motion, and its range of motion. The HiResâ„¢ design ads a white line behind measurement gradations to make the readings easy to see. The head has three scales ranging from 30°hyperextensions through 120° flexion calibrated to be used with the ISOM (International Standards of Measurement, STFR) system. Arm has a linear scale in inches and centimeters and remains at measurement position until reset. Angle scale reads 1° increments. Finger – HiResâ„¢ Flexion to Hyper-Extension, 25-pack
-
Baseline 360 degree clear plastic goniometer joint angle and range of motion measurer
$118.08Add to cartTransparent plastic goniometer permits observation of joint?s axis of motion, and its range of motion. The 360° head has three scales calibrated to be used with the ISOM (International Standards of Measurement, STFR) system. Arm has a linear scale in inches and centimeters and remains at measurement position until reset. Angle scale reads 1° increments. 360 Degree Head – 8 inch Arms, 25-pack
-
Baseline 360 degree clear plastic goniometer joint angle and range of motion measurer
$145.80Add to cartTransparent HiResâ„¢ plastic goniometer permits observation of joint?s axis of motion, and its range of motion. The HiResâ„¢ design ads a white line behind measurement gradations to make the readings easy to see. The 360° head has three scales calibrated to be used with the ISOM (International Standards of Measurement, STFR) system. Arm has a linear scale in inches and centimeters and remains at measurement position until reset. Angle scale reads 1° increments. HiResâ„¢ 360 Degree Head – 8 inch Arms, 25-pack
-
Baseline 360 degree clear plastic goniometer joint angle and range of motion measurer
$132.31Add to cartTransparent HiResâ„¢ plastic goniometer permits observation of joint?s axis of motion, and its range of motion. The HiResâ„¢ design ads a white line behind measurement gradations to make the readings easy to see. The 360° head has three scales calibrated to be used with the ISOM (International Standards of Measurement, STFR) system. Arm has a linear scale in inches and centimeters and remains at measurement position until reset. Angle scale reads 1° increments. HiResâ„¢ 360 Degree Head – 6 inch Arms, 25-pack
-
Baseline Absolute+Axis attachment for 360 degree plastic goniometers, 12 inches, 25 each
$127.84Add to cartBaseline? Absolute+Axis? Goniometer attachment is a removable attachment piece to be attached to any 12″ plastic goniometer (sold separately). When attached to the end of one goniometer arm, the standard goniometer is transformed into an Absolute+Axis? goniometer. The Absolute+Axis? (AA) goniometer establishes a “true” vertical or horizontal to the start point of a measurement. Many goniometric measurements require one arm of the goniometer to be positioned either horizontally or vertically. The other arm is then lined-up with the patient’s body part. Until now, the practitioner had to “assume” or “eyeball” the vertical or horizontal position. This interpolation is often incorrect and introduces measurement error. The Absolute+Axis? goniometer removes measurement variability and allows the practitioner to concentrate on correct placement of the other goniometer arm and the patient’s body position. Some measurements the AA goniometer is designed to improve are: shoulder and hip rotation (internal, external); cervical flexion, extension, rotation and side bending; hamstring flexibility; and active ROM.
-
Baseline AcuAngle inclinometer, 2 each
$120.50Add to cartAcuAngle® Inclinometer with adjustable feet is used to measure range-of-motion (ROM). Standards are codified in the AMA Guide to the Evaluation of Permanent Impairment, third edition. Place inclinometer near joint to be measured; turn dial until scale reads 0; take joint through its range; read range traveled directly from dial. Adjustable feet along scale (side-to-side) adapt to body contours. Some neck and back measurement protocols require the simultaneous use of 2 inclinometers.
-
Baseline digital inclinometer, 2 each
$145.68Add to cartDigital Inclinometer with fixed feet is used to measure range-of-motion (ROM). Place inclinometer near the joint to be measured; press “zero” button; move joint through its range; press the “hold” button. Read measurements on LCD. Uses 1 x 3v CR2032 battery (included). Some neck and back measurement protocols require the simultaneous use of 2 inclinometers.
-
Baseline electronic pinch gauge, 60 lb/27 kg
$99.26Add to cartThe Baseline® Electronic Pinch Gauge performs tip, key, and palmar tests. Strength readings are displayed on an easy-to-read LCD screen. Record readings in lbs or kgs with a maximum capacity of 50lbs (23kg). The Electronic Pinch Gauge can store up to 99 readings; use the toggle buttons to review previous readings. Comes with a 3V battery and wrist strap.Baseline electronic pinch gauge, 60 lb/27 kg
-
BESSEY 2400HD-10 Machine Table Clamp,12 in,2220 lb
$187.98Add to cart” Hold-Down Clamp, Overall Length 12 in, Application Drilling, Tapping, Light Milling, Welding Features Item: Hold-Down Clamp For Use With: T-Slot Hold Down Tables Number of Pieces: 1 Package Quantity: 1 Width: 2-1/2″ Application: Drilling, Tapping, Light Milling, Welding Length: 12″ Slot Size (In.): 5/8 Thickness: 12-1/2″ Overall Width: 2 1/2 in Overall Length: 12 in ” Item Type: Hold-Down Clamp Brand: BESSEY Manufacturer Part Number: 2400HD-10
-
BOSCH HS2125 Hammer Steel 1 18 Hex,Tamper Plate,8 In
$127.58Read moreMaintain optimum demolition hammer performance with a demolition hammer accessory like grease and the proper oil. Bosch Hammer Steel 1 1/8 Hex include characteristics like: For Use With: 1 1/8 Hex Demolition Hammers, Application: For Compacting Soil and Gravel, Shank Type: -.FeaturesOverall Length (In.): 8 x 8Item: Hammer Steel 1 1/8 HexIncludes: -Hex (In.): -Length (In.): -For Use With: 1 1/8 Hex Demolition HammersType: Tamper PlateApplication: For Compacting Soil and GravelShank Type: -Shank Size (In.): –
Products
-
60" Mantel Shelf with Optional Corbels
$135.83
-
HART 20-Volt Brushless Orbital Jig Saw (Battery Not Included)
$98.54
-
KRAUS Natura Square Semi-Recessed Composite Bathroom Sink with Matte Finish and Nano Coating in White
$75.11
-
KRAUS Ansel Dual Function Pull-Down Kitchen Faucet, Chrome Finish
$117.12
-
Kraus Spot Free Bolden™ 18-Inch Commercial Kitchen Faucet with Soap Dispenser in all-Brite™ Stainless Steel Finish
$177.07
Top rated products
-
Glidden One Coat Exterior Paint and Primer, Tundra Frost / White, 5 Gallon, Semi-Gloss
$132.84
-
Ninja Professional Blender with Single Serve Cups BL660WM
$77.42
-
Dyson V8 Animal Cordless Vacuum | Titanium | Refurbished
$269.10
-
AdirOffice 0.5 Cubic Feet Wall Safe with Electronic Lock
$103.68
-
Excellante 25 quart 18/8 stainless steel brazier, comes in each
$100.20